Announcement

Collapse
No announcement yet.

Project: PBR-Built Z/28

Collapse
X
Collapse
Who has read this thread:
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Project: PBR-Built Z/28

    I used the same ones as well.


    Sent from my iPhone 5 using Tapatalk
    sigpic
    1992 Chevy Camaro 25th Anniversary-SOLD
    1992 Chevy Camaro 25th Anniversary
    1997 Chevrolet Corvette

    The Original
    Originally posted by meissen
    I actually agree with Darren on everything he said...
    Originally posted by 81DaytonaPaceCar
    Yep, pretty much...not too often I agree 100% with Darren, but there it is...


    Comment


    • bump stops are for pansies
      2000 Trans Am l 1967 Firebird

      sigpic

      Comment


      • Mine broke off on Yoshi, I love the kerplunkbampow sound it makes over potholes

        Comment




        • Apparently buying torque arms that fit is also for pansies! Honestly after doing this im not sure how anyone goes lower than i did without major problems. Hopefully this is good for another inch of travel or so before the "self-clearancing" feature kicks in

          I also i think i have the exhaust clearance issue resolved... Need to bolt it up and see. I am going to be tucking the mufflers up higher than before

          Lastly, an updated picture of free suspension components. (i have a front sway bar in the attic also). how do i still have these tubular a-arms??????



          -Joel
          1995 Z28 M6 - AI226/234 - autocross ricer
          1984 Scottsdale K10 - 305/4bbl/4spd


          WTB List:Midwest Chasis DS Loop

          Comment


          • You mean tubular control arms, not A arms correct?
            Originally posted by Yoshi94
            Mines about an inch bigger than Kyles. I need to get one of those
            Originally posted by ryanwarby01
            Put it this way, if you have a money tree a LT1 is a wood chipper!
            sigpic

            Comment


            • Originally posted by Fox Slaughter View Post
              You mean tubular control arms, not A arms correct?
              Yeah...
              -Joel
              1995 Z28 M6 - AI226/234 - autocross ricer
              1984 Scottsdale K10 - 305/4bbl/4spd


              WTB List:Midwest Chasis DS Loop

              Comment


              • I was going to say you're not fancy enough to have Tube A-Arms.
                Originally posted by Yoshi94
                Mines about an inch bigger than Kyles. I need to get one of those
                Originally posted by ryanwarby01
                Put it this way, if you have a money tree a LT1 is a wood chipper!
                sigpic

                Comment


                • Originally posted by Fox Slaughter View Post
                  I was going to say you're not fancy enough to have Tube A-Arms.
                  Nope! Those are slated in with the engine bay project next project season.
                  -Joel
                  1995 Z28 M6 - AI226/234 - autocross ricer
                  1984 Scottsdale K10 - 305/4bbl/4spd


                  WTB List:Midwest Chasis DS Loop

                  Comment


                  • Did you have to disconnect the front sway bar to get the front shocks out?

                    I was having a fun time trying to get to the bottom of the link through the arm, I bought new links for the front and will probably just cut the old ones in half.
                    Originally posted by Yoshi94
                    Mines about an inch bigger than Kyles. I need to get one of those
                    Originally posted by ryanwarby01
                    Put it this way, if you have a money tree a LT1 is a wood chipper!
                    sigpic

                    Comment


                    • Not sure if i had to or not but i did and it at least made it a lot easier. Many times the original links are going to shear off instead of disconnect, but the next time will be easier at least.

                      Edit: if youre having trouble getting links through the arm disconnect it at the chasis first so you can pivot the whole thing around to get a better angle on the bolt/nut.
                      -Joel
                      1995 Z28 M6 - AI226/234 - autocross ricer
                      1984 Scottsdale K10 - 305/4bbl/4spd


                      WTB List:Midwest Chasis DS Loop

                      Comment


                      • Probably still have those control arms because they're non-adjustable. Although for free, anyone with stockers SHOULD get those. If I was paying money, though, I'd pay to get the adjustables.
                        - Brian Meissen
                        Owner, MiFBody.com
                        Administrator, LTxTech.com


                        1994 Camaro LT1 Transplant - 357ci LT1, cammed, stalled, and driven.
                        2022 Camaro LT1 - "Cherry Bomb 2"
                        Michigan FBody Meet & Greet Car Show 2022
                        June 4th, 2022 - 9am to 3pm!!!
                        The HUB Stadium, Auburn Hills, MI

                        Comment


                        • I thought Spencer was picking them up? I would of picked them up from you when we met up the other day

                          Comment


                          • Originally posted by BP_Z28 View Post
                            I thought Spencer was picking them up? I would of picked them up from you when we met up the other day
                            Yeah, I thought about that I should have given them to you. We can meet up again if you want.
                            -Joel
                            1995 Z28 M6 - AI226/234 - autocross ricer
                            1984 Scottsdale K10 - 305/4bbl/4spd


                            WTB List:Midwest Chasis DS Loop

                            Comment


                            • If these things don't go soon, Joel, I'll gladly take a run up Romeo Plank and get them from you. I know Spencer had dibs, and then Rolo. I guess put me in line after him
                              2000 SS Convertible #1414 - Light Pewter 6 Speed

                              Comment


                              • Originally posted by Atrus View Post
                                If these things don't go soon, Joel, I'll gladly take a run up Romeo Plank and get them from you. I know Spencer had dibs, and then Rolo. I guess put me in line after him
                                close to 16 and groesbeck? i need to stop by joels real soon for some stuff i could grab them for you if you wanted. might save you a little time.
                                91 Trans am, 305, Lt1 cam, 24lb injectors, headers, SLP LM2, SW chassis, massive panhard, lowered, modded TPI, Tuned, 4.10s, Lincoln locked
                                85 Z28 406/th400?/3.42 4th gen disc rear/4th gen dash
                                00 Tahoe Z71........Stock
                                97 K1500 lt4 cam, 1.6s, MPFI, Solid axled, IROKs,------winter beater

                                Comment

                                Working...
                                X