fuel injection help

[ba_ta_97]

Im looking to purchase http://www.summitracing.com/parts/ACC-150836/ fuel injectors currently i have a high flow fuel pump. but nothing else that would really add power or require a greater fuel flow. But i plan on doing headers, throttle body and a few other bolt on mods this summer with a engine rebuild to come this winter, i saw these were 36 lbs/hr and would like some input on if this would be good for how little mods i have keeping in mind i will add more soon and eventually turbo the car. Another question i had was if i could keep the original wiring harness of my current fuel injectors and apply them to the new ones. Any and all advice/help would be great thank you.

[DETROITMUSCLE]

keep in mind a tune is NECESSARY for new injectors, but I don't see a bolt-on car needing them.

[1BADAIR]

keep in mind a tune is NECESSARY for new injectors, but I don't see a bolt-on car needing them.

dont even turn the key on without it being programmed for them

[prorac1]

FWIW, i am still running 24 lb injectors in my car. I have a walbro 340 fuel pump IIRC. I am running around 85-87 percent duty cycle, and i monitor it very closely. And remember that you can go to big on injectors and your duty cycle will be to low. You dont want that either. I would just stay with the factory fuel injectors till you do heads, cam or something like that than move up to 36ers or so. JMHO. Eric L

[prorac1]

Do the injectors after the rebuild and leave the stockers in for this year.