I didnt know any thing was wrong with the transmission? Eric L
Announcement
Collapse
No announcement yet.
LT1 exhaust questions
Collapse
X
-

1997 Camaro SS #2819 M6, Red, 3.42, 1 of 27, Ttops, BBK shorty headers, Flowmaster cat back, 1.6 rr, LT4 valve springs, ASAM CAI, Centerforce clutch, runs 12s, breaks 10 bolts.
http://s602.photobucket.com/albums/t...20Camaro%20SS/

1963 Plymouth Valiant Signet 200, 6.0 LS3, Carb, Rapid Motorsports Dominator 2X cam.
http://s602.photobucket.com/albums/t...uth%20Valiant/
-
i noticed a significant gain in power with my duals over a single 3" with a cutout and no cats.... but my car is cammed.
Tailpipes wont reduce the volume that much but it will DRASTICALLY cut down the interior racket. Hell, just having turndowns aimed correctly cut the interior noise down noticeably.-Joel
1995 Z28 M6 - AI226/234 - autocross ricer
1984 Scottsdale K10 - 305/4bbl/4spd

WTB List:Midwest Chasis DS Loop
Comment
-
Post Whore
- February 19th, 2010
- 3991
- Peter Schultz
- 1996 Z28
- Livonia/Plymouth
- Transmission Calibration Engineer, Ford Motor Company
- Send PM
haha yeah, when we removed it so we could take out the engine, we discovered there was a GAPING hole in the bellhousing, like big enough for me to stick my hand in. There was also a crack going from the hole all the way over the top to the other side. I could pull the top part of the housing apart, so yeah, we figured I shouldn't be driving it around like that lol.Originally posted by prorac1 View PostI didnt know any thing was wrong with the transmission? Eric L
yeah, I'm mostly concerned with interior noise (I'd like to drive around without having to yell to hold a conversation), although not getting pulled over for loud exhaust would be nice too.Originally posted by JoeliusZ28 View Posti noticed a significant gain in power with my duals over a single 3" with a cutout and no cats.... but my car is cammed.
Tailpipes wont reduce the volume that much but it will DRASTICALLY cut down the interior racket. Hell, just having turndowns aimed correctly cut the interior noise down noticeably.
1996 Camaro Z28 cam, heads, stall, and a few other goodies
Alumni Member, MSU Racing Club
THREE-PEAT MiFbody Meet & Greet "Longest Hauler Award" 2010, 2011, 2012
Originally posted by JasonHIt's amazing what you can get done when you throw copious amounts of money at something.
Comment
-
Than just run a cat back with a cutout. Heck, my wife (Rebecca) has been driving the SS around for 2 weeks with the cutout open. When she gets tired of the noise, ill cap it off. The best of both worlds IMHO. Eric L
1997 Camaro SS #2819 M6, Red, 3.42, 1 of 27, Ttops, BBK shorty headers, Flowmaster cat back, 1.6 rr, LT4 valve springs, ASAM CAI, Centerforce clutch, runs 12s, breaks 10 bolts.
http://s602.photobucket.com/albums/t...20Camaro%20SS/

1963 Plymouth Valiant Signet 200, 6.0 LS3, Carb, Rapid Motorsports Dominator 2X cam.
http://s602.photobucket.com/albums/t...uth%20Valiant/
Comment
-
Post Whore
- February 19th, 2010
- 3991
- Peter Schultz
- 1996 Z28
- Livonia/Plymouth
- Transmission Calibration Engineer, Ford Motor Company
- Send PM
I just found some ceramic-coated Pacesetter longtubes, 5k miles, for $280 shipped. My friend thinks that I should snatch them up right away. What do you guys think?
also, what does a good cat-back setup usually cost? The cheapest I've seen online is about $430 for a Magnaflow kit. Quotes I've gotten from exhaust shops have been about the same for a true-dual setup, only that's including installation.Last edited by alone_and_insane; April 26th, 2010, 03:35 PM.
1996 Camaro Z28 cam, heads, stall, and a few other goodies
Alumni Member, MSU Racing Club
THREE-PEAT MiFbody Meet & Greet "Longest Hauler Award" 2010, 2011, 2012
Originally posted by JasonHIt's amazing what you can get done when you throw copious amounts of money at something.
Comment
-
Interior Whore
- January 21st, 2008
- 6380
- fred
- 1996 Camaro z28
- U.P. and over you.
- united states coast guard
- Send PM
buy them, and stay with a stock catback and a cutout after the y. i love my setup, i can be as loud as possible or able to not even hear my car running.wishing i could drive like joe and the atm squad
Comment
-
For a good price on a catack PM Creight a site sponsor hes got them on sale right now.sigpic
1992 Chevy Camaro 25th Anniversary-SOLD
1992 Chevy Camaro 25th Anniversary
1997 Chevrolet Corvette
The Original
Originally posted by meissenI actually agree with Darren on everything he said...Originally posted by 81DaytonaPaceCarYep, pretty much...not too often I agree 100% with Darren, but there it is...
Comment
-
Post Whore
- February 19th, 2010
- 3991
- Peter Schultz
- 1996 Z28
- Livonia/Plymouth
- Transmission Calibration Engineer, Ford Motor Company
- Send PM
just bought some headers

1996 Camaro Z28 cam, heads, stall, and a few other goodies
Alumni Member, MSU Racing Club
THREE-PEAT MiFbody Meet & Greet "Longest Hauler Award" 2010, 2011, 2012
Originally posted by JasonHIt's amazing what you can get done when you throw copious amounts of money at something.
Comment
-
Interior Whore
- January 21st, 2008
- 6380
- fred
- 1996 Camaro z28
- U.P. and over you.
- united states coast guard
- Send PM
-
Lurker
- March 13th, 2010
- 3476
- TJ
- 1995 Chevy Camaro Z28
- Clinton Twp Michigan
- Powerline Tree Trimmer.
- Send PM
Then give me some headers.Originally posted by Yoshi94Mines about an inch bigger than Kyles. I need to get one of thosesigpicOriginally posted by ryanwarby01Put it this way, if you have a money tree a LT1 is a wood chipper!
Comment
-
Post Whore
- February 19th, 2010
- 3991
- Peter Schultz
- 1996 Z28
- Livonia/Plymouth
- Transmission Calibration Engineer, Ford Motor Company
- Send PM

1996 Camaro Z28 cam, heads, stall, and a few other goodies
Alumni Member, MSU Racing Club
THREE-PEAT MiFbody Meet & Greet "Longest Hauler Award" 2010, 2011, 2012
Originally posted by JasonHIt's amazing what you can get done when you throw copious amounts of money at something.
Comment
-
Lurker
- March 13th, 2010
- 3476
- TJ
- 1995 Chevy Camaro Z28
- Clinton Twp Michigan
- Powerline Tree Trimmer.
- Send PM
Originally posted by Yoshi94Mines about an inch bigger than Kyles. I need to get one of thosesigpicOriginally posted by ryanwarby01Put it this way, if you have a money tree a LT1 is a wood chipper!
Comment

Comment