Announcement

Collapse
No announcement yet.

No-Go Camaro

Collapse
X
Collapse
Who has read this thread:
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • No-Go Camaro

    Today, after I spent 3 hrs cleaning my ride. I decided to go for a joyride cruisin along all is well t-tops out, Disturbed singing to me, foot to the floor in 3rd about 80 MPH not to the revlimiter yet it dies like I hit the redline. I push the clutch in coast for a bit then try to bump start nothing happens.So I pull over turn down the radio and try to start it. Not suprisingly it does not start but it does turn over just fine. So I'm pretty sure its a fuel pump related issue. Since I bought the car in 2005 everytime I fill it with gas it stinks like gas. I think today it just had enough. I dont know what kind of fuel mods it may have in the tank cause I have never looked. I just have to wait until Monday. Has anyone had this happen if so what was it? I tried starting fluid and I got it to run horrible for about 2 seconds and I can hear the fuel pump, so I'm leaning towards the fuel filter being kaput
    sigpic

  • #2
    filter might be horribly clogged

    isnt there a valve where u can test pressure somewhere near that




    "LIVE AND DIE BY THE BOWTIE"


    Comment


    • #3
      Theres a valve on the rail facing the front, look for around 55 pounds IIRC.
      1999 Camaro - 6 liters of fury.....

      Comment


      • #4
        Originally posted by craig62989 View Post
        filter might be horribly clogged

        isnt there a valve where u can test pressure somewhere near that
        There is a schrader valve.

        Comment


        • #5
          Originally posted by bri2203 View Post
          There is a schrader valve.
          Where is it under the car, or by the Fuel rail?
          sigpic

          Comment


          • #6
            On the rail, picture coming.
            1999 Camaro - 6 liters of fury.....

            Comment


            • #7
              52-58psi
              were you sprayin?

              Comment


              • #8
                nope not spraying
                sigpic

                Comment


                • #9
                  Bottom right of this picture, theres a cap that screws on. It would be drivers side, facing forward, just cut out of the picture in your signature.
                  1999 Camaro - 6 liters of fury.....

                  Comment


                  • #10
                    Another stupid question, what do I use to check pressure? A tire gauge?
                    sigpic

                    Comment


                    • #11
                      A Fuel pressure gauge. Not sure if you could use a tire gauge or not, if its one you dont mind ruining, I suppose you could try.
                      1999 Camaro - 6 liters of fury.....

                      Comment


                      • #12
                        Internet searches are an amazing thing. I found the gauge and how and where to hook it up, one more question if the car will not start will there still be fuel pressure while cranking it? As long as the filter, pump, relay, or whatever is working or not clogged?
                        sigpic

                        Comment


                        • #13
                          in my freinds camaro he had the same problem exept the fuel pump was grounded out so it wont come on for a bit a wire would hit it and the car would die
                          91 Trans am, 305, Lt1 cam, 24lb injectors, headers, SLP LM2, SW chassis, massive panhard, lowered, modded TPI, Tuned, 4.10s, Lincoln locked
                          85 Z28 406/th400?/3.42 4th gen disc rear/4th gen dash
                          00 Tahoe Z71........Stock
                          97 K1500 lt4 cam, 1.6s, MPFI, Solid axled, IROKs,------winter beater

                          Comment


                          • #14
                            I think its the filter
                            sigpic

                            Comment


                            • #15
                              There should be pressure at the rail when keyed on. I wouldn't count on it being just the filter either...


                              Comment

                              Working...
                              X