Welcome to the Michigan FBody Association website.
The Michigan FBody Association is a centralized website for FBody enthusiasts to discuss what's going on in the Michigan area. MiFbody.com was created to allow for an easy one-stop place to find out what's going on in Michigan as far as FBody events, to find out what clubs are available in your immediate area, and for an easy place to post classifieds for items you want to sell! Our goal was to create a more close-knit community of FBody enthusiasts in the state of Michigan, and to bring Camaro and Firebird enthusiasts alike together for some amazing FBody events!
The most important thing to know about the Michigan FBody Association is that we are NOT a club! The Michigan FBody Association is open to everyone, and is a community. Thus, we will have get togethers, casual cruises, events, and such like that, but this is not an exclusive club and it's 100% free to join this site! So what are you waiting for? Register now!
If you have any problems with the registration process or your account login, please contact us!
Looks sweet. Does it light up? That would be sweet if it did, not too familiar with 4th gen interiors so I don't know what was there before. Either way pretty cool name tag.
1978 Pontiac Firebird Formula W66
350 Small Block Chevy Bored .030 Over (355) GM Performance Parts Vortec Heads Holley 650cfm Double Pumper Edelbrock Performer-Plus Cam Edelbrock Vortec Performer RPM Hedman Hedders 1-5/8" Long Tubes 2-1/2" Exhaust With "H" Pipe & Hooker Aero Chamber Mufflers TH350 With B&M Transpak Shift Kit & 2400rpm Stall B&M Tork Master Converter
Looks sweet. Does it light up? That would be sweet if it did, not too familiar with 4th gen interiors so I don't know what was there before. Either way pretty cool name tag.
there was a big ugly tape holder thing there, so i riped it out. but when i did that there was like little screw holes there. so i made that plate to cover them up, oh and the light up thing... i have white led's but i dont have the resesitors or what ever they need, and i dont know which ones i need. so untill i figure that out the plate wont be lighting up
please excuse my spelling... i went to a cathlic school.
... i have white led's but i dont have the resesitors or what ever they need, and i dont know which ones i need. so untill i figure that out the plate wont be lighting up
If you wire 4 LEDs in series, you don't need any resistors. I would guess you're going to need at least four? Go about halfway down this link... http://www.oznium.com/forum/topic20
i have white led's but i dont have the resesitors or what ever they need, and i dont know which ones i need. so untill i figure that out the plate wont be lighting up
The diagrams suggested are ok, and they should work provided the Vf drop isn't too different from LED to LED. Remember that LEDs are technically constant current devices.
1999 Black M6 Camaro SS w/ T-Tops
Installed: CAI, Smooth Air Bellows, K&N, SLP Lid, CAGS Disabled
Soon: Cat Back (Borla or Hooker), Tower Brace
Future: ATI Procharger Setup
Japanese Manager: "Oh, dis cam-ah-roe sounds American. How many CCs is it?"
Tweet
< 4.6 Stang
357ci LT1, cammed, stalled, and driven. 
Comment