Announcement

Collapse
No announcement yet.

1993 camaro v6 trans question

Collapse
X
Collapse
Who has read this thread:
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • 1993 camaro v6 trans question

    my friends 1993 wont shift into park. When you put it into park it goes into reverse
    any clues to what this could be?, i think it could be the linkage
    sigpic

    1996 Base Model
    +2 cylinder mod

  • #2
    Yeah, the linkage is probably screwed up, or it needs a whole new shift cable.

    Comment


    • #3
      Its most 100% the linkage.

      Comment


      • #4
        there is an adjustment on the bracket that mounts to the trans by the shift arm. take it loose then you will see clips on top side that release block to slide down releasing center to move forward and back to adjust.
        Also could be cable ends worn/broke with to much play in it.
        sigpic
        1998 Trans Am Convertible A4 - WS6 hood, WS6 air lid, WS6 rims, drilled/slotted rotors.

        Comment


        • #5
          the linkage wasnt even attached to the trans !!!!
          both of the 10mm bolts were gone. we got some from my extras box. The trans stays in and goes into every gear, but im sure he damaged it driving it like that for two days
          it seems to take along time to accel
          sigpic

          1996 Base Model
          +2 cylinder mod

          Comment

          Working...
          X