94 Z28(SSclone) Build Log

[DETROITMUSCLE]

no its not, but its not too far off either.

[Kwazrollinz28]

no its not, but its not too far off either.

230/ 240 i think i can't remember.

Anyhow. I bought a secret surprise i'll reveal at the M&G
and i gotta sell my other secret surprise NITROUS won't work with my setup.

And i got the funds to call mike about the 3800 stall i need.

[c0ncEpT]

im pretty sure there is only one tack in that picture. the pump itself is only discolored in one spot... right below the spot of weld.

Yes there is 1 single tack on the left side of the picture. The long shiny looking thing on the right is where he grabbed it with vice grips to get it off. I had to blow the picture up to get a good look at it.

[MunsterZ28]

steve get it running, ill run u for ur heads

[Kwazrollinz28]

steve get it running, ill run u for ur heads

I wish but at this point its a stand still, The blasting shop closed early at 10am today so i couldnt get my parts, and i have to wait 5 days for my suspension parts so i cant even paint the subframe yet.

most i can do at this point is the oil pan WOOPEEE
I'll probably just play in the house today, all yesterday i saw BEAUTIFUL 4th gens all over. and i m mean everywhere.

[BP_Z28]

The guys I cruise with will sometimes cruise to Burton,Davison.. and around Lapeer.. but thats mainly on Fridays.. unless were going to Davison car shows or w/e

you in MH or burton?

[Kwazrollinz28]

The guys I cruise with will sometimes cruise to Burton,Davison.. and around Lapeer.. but thats mainly on Fridays.. unless were going to Davison car shows or w/e

you in MH or burton?

right now madison heights Since thats where all my tools are.

[Kwazrollinz28]

new stuff just got it back from the blasting shop

[meissen]

WOW - that's clean!

[Kwazrollinz28]

WOW - that's clean!

yah he does good work for 20 bucks haha, he did my whole engine bay for 100 8-O

and it doesnt hurt gaskets or rubber items


what do you think would be good at getting the dust out of everything i used heavy duty brake parts cleaner on the Timing chain cover and throttle body and it work but I want to make sure i got all the sand and dust out...

[DETROITMUSCLE]

your best bet is an air compressor and nozzle

[Kwazrollinz28]

your best bet is an air compressor and nozzle

cool did that

[Darren]

Looking great man!

[Kwazrollinz28]

Pictures plus WOOT i said screw advance 5 day waiting on my bushing, I went to Autozone about 30 mins ago and ordered 2 bushing for the subframe for half the price, and they actually had them, Now i can get the subframe done and painted tomorrow and the car will be all together friday night WOOT WOOT WOOT, that excites me, And im ordering my tune right NOW!!

[DETROITMUSCLE]

bad ass Steve my phone call must have put some fire under your ass to get it done in time where are you ordering the tune from, I have a real issue with mail order tunes so I hope it works out for you.