94 Z28(SSclone) Build Log

[Kwazrollinz28]

Ok so i started i think around 1 am after picking my ass all day.

it is now 6am, And im only inside because the fumes from the A/c Were making me sick. and its not good to breathe either, Ask B he got a mouthful at his build lol.

Anyways heres some pictures i will update you guys as i go, I will be finished with the car today, and tomorrow i MIGHT start to pull the subframe to install the new oil pump. but today i will install the cam and all the new goodies.

I still haven't found my 30# injectors 8-O
anyways have fun.

also your see in one of the pictures the a/c line spraying like crazy. i ran soon as it starting spitting haha

[ITSSLOW]

Its going to be so much easier to work with that front bumper tore off. Your back will thank you when all is said and done! Keep us updated!

[meissen]

Yikes - you're not dropping the kframe out to do it? I'm going to disagree with Tom on this - your back is going to hate you. Haha and I can't believe you started at 1am working on it - you're crazy man!

[b.a.camaro]

Good luck, nice pics by the way.

[Kwazrollinz28]

Okay guys problem my intake manifold is stuck on the block and i have every bolt out of it. I even removed the throttle body so i could try to get more of a grab to get it off. last time i did this it just popped off, i think my dad used super man silicon or some crap.

[b.a.camaro]

Wow it should just pop off with a little force, I would say VERY CAREFULLY try using a putty knife and see if you can loosen the sides with out doing damage, maybe if you get one side worked good enough it may just pop off.

[meissen]

Just whatever you do - be careful about that back oil sensor.

[Kwazrollinz28]

Umm yeah i guess my dad went over board with the silicon and i found out why my car leaked so bad, Somehow EVERY GOD DAMN LITTLE bolt came SOOOO LOOSE that i could turn them out with my finger, because at Idle no Oil leak, But at WOT i had lots of oil meaning BLOW BYE.


and what the hell there was rat shit all over my motor, i had a good laugh about that one lol

[Kwazrollinz28]

Just whatever you do - be careful about that back oil sensor.

Don't matter to me, I'm using the LS1 designed Oil sensor next.

[Kwazrollinz28]

well looks like im done for the day, My harmonic balancer tool is the wrong one, So i can't finish this today, and damn thought i'd have the car all ready to roll in a week.

[Kwazrollinz28]

okay last bit for the day im going to bed im tired lol

[Kwazrollinz28]

[nascarnate326]

Looks good. Whens your estimated finish time?

[Kwazrollinz28]

got the oil pump and cam in now its time to reassemble.
I still need to get new A-arm bushings. but i ran out of money today or for the week


the car will be for surely done next week if this rain quits.

[Kwazrollinz28]

just checked my walls in the block. They looks Sweet no need for a rebuild for awhile

i think this motor has been rebuilt before cause it runs damn sweet.
anyways heres more pics.

NOTICE welded oil pump i takes no chances biatch.