Welcome to the Michigan FBody Association website.
The Michigan FBody Association is a centralized website for FBody enthusiasts to discuss what's going on in the Michigan area. MiFbody.com was created to allow for an easy one-stop place to find out what's going on in Michigan as far as FBody events, to find out what clubs are available in your immediate area, and for an easy place to post classifieds for items you want to sell! Our goal was to create a more close-knit community of FBody enthusiasts in the state of Michigan, and to bring Camaro and Firebird enthusiasts alike together for some amazing FBody events!
The most important thing to know about the Michigan FBody Association is that we are NOT a club! The Michigan FBody Association is open to everyone, and is a community. Thus, we will have get togethers, casual cruises, events, and such like that, but this is not an exclusive club and it's 100% free to join this site! So what are you waiting for? Register now!
If you have any problems with the registration process or your account login, please contact us!
the hubs need to be drilled out, I don't think ANY wheel likes my 94 camaro they slip on like a glove on the 95 z28 though
Really?!? I didn't think that there was any difference in the hub sizes other than when going from a 98+ car to a 97 or earlier. I took a set of wheels off of an LS1 car and put them on mine, just had to take a dremmel to the inside hub little bit. No need for a drill, its super easy, takes 5 mins max for both wheels.
EDIT: Also, I LOVEEEEE the way the chrome looks on your car. Especially love the 315s in the rear as well. I'm guessing that the rears are 17x11? Or did u squeeze them on to a 9?
2011 Mustang GT
20" Satin Black AMRs with 305/35 & 275/35 MT Street Radials, Saleen Grille, CS Lower Valance, Roush Axleback, GT500 Spoiler, resonator delete
Really?!? I didn't think that there was any difference in the hub sizes other than when going from a 98+ car to a 97 or earlier. I took a set of wheels off of an LS1 car and put them on mine, just had to take a dremmel to the inside hub little bit. No need for a drill, its super easy, takes 5 mins max for both wheels.
EDIT: Also, I LOVEEEEE the way the chrome looks on your car. Especially love the 315s in the rear as well. I'm guessing that the rears are 17x11? Or did u squeeze them on to a 9?
thats what i meant dremmel the hub a bit, I've had to do it to all my wheels even my drag set. the rears are 17x11 you cant really tell cause of the chrome haha, I have a set of these in Grey to.
Tweet
Comment