Tweet
I am going to sound like a real newbie here and ask how to remove my interior door panels to put speakers in, i proly could figure it out easily but i always like to be positive on what i am doing. i know in the interior there are screws that are sometimes missed and snaps that if missed could lead to damage if you try to force it off. better safe than sorry
-
-
look over the entire panel, should be about 5 screws if I recall remove them all and then lift up on the panel to remove2011 Ford Raptor SuperCrew
SVT Beadlock Wheels
Roush Intake, Corsa Exhaust
20" and 40" Light Bars
2000 Camaro Z28
Stripped Down Drag Car Build
Project 1999 Camaro Z28
2009 G8 GT Stryker Blue Metallic-SHEGONE
Crate LS3, LS9 Cam, LSA Supercharger, Metco Solid Isolator
RotoFab Intake, HSRK, Camaro Trans Pan
ZL1 HX, ZL1 Fuel Pump, CTS-V Lid, LSA Injectors
Pat G - 93 Octane Tune
Kooks 1-7/8" Longtubes, High Flow Cats, X Pipe, Solo AxleBacks
CTS-V Calipers, Brembo Pads
H&R Lowering Springs, Whiteline Bushings, FE3 Struts/Shocks, Camaro 20" Wheels
HIDs, LED Conversion, Atari Gauges, Tint, Roof Carbon Fiber Wrapped, Innovative Wideband
2.55 Lingenfelter Pulley and Injectors waiting to go on!
sigpic -
Its actually quite easy, I think the hardest part was lining it all up to put it back on. I used the shoebox instructions, they pertain to replacing the window motor, so just read until you get the door panel off.
http://shbox.com/page/windowmotor.html
Just click the start window up/down button and it will take you through it step by step.1999 Camaro - 6 liters of fury.....
Comment
-
Comment