lizs head/cam swap

[Phantom409]

Sorry about the problems Liz
You'll get it

Do you know anyone that works in a garage????

[1BADAIR]

haha how does it sound

[MORNINGSTAR2101]

hmm
find a scan tool and make sure the solenoids are getting the command.
maybe he forgot to plug the solenoids in inside the trans

i haz no access to scan tool =/ the good news is that i can just sit in my car and enjoy the engine, which is more than i could do a week ago.... ...

[1BADAIR]

hmm
find a scan tool and make sure the solenoids are getting the command.
maybe he forgot to plug the solenoids in inside the trans

[Darren]

Good luck Liz!

[MORNINGSTAR2101]

i appreciate the offer b! also, can be pushed while its running. and yeah, the torque converter was installed properly. jonny shared his unfortunate story with me, so we made sure that we twisted it properly before installing. we rechecked everything and its all hooked up. kinda feel like im at a brick wall at this point.

[DETROITMUSCLE]

who installed the converter? Was it reinstalled properly? Also make sure the speed sensor on the tailshaft is connected.

[OIF1VET]

Damn gremlins.. Good luck Liz, hope you get her fixed SOON!

[meissen]

Sorry to hear, Lizard. If you need help through the week hit me up. If I'm not too busy with M&G stuff I'd be willing to come help you out. I've got the whole week off from work.

[98blackbeauty]

Sorry to hear about your problem!

I talked to Pace today.

We have come up with 4 things:

Your bracket may have to be adjusted where your linkage hooks up to the trans.
Recheck all your connections again.
Check that SES light.
Might be the tune but make sure you rule out any manual errors before calling the tuner.

Yap we did talk.. We gotta get this thing going down the road!! Check this stuff above evan if its for the 3rd time. also Se if you now anyone with a scan tool so you can read that SES light.. See what its saysing and such. Make sure no wires are pinched, and that they have some slack...
Pace

[MP81]

Glad to hear it runs - but sorry to hear it doesn't move.

[1BADAIR]

hook up a good scan tool and make sure the pcm is commanding the shift
pushed while running?
with the engine off any auto trans car can be pushed in while in gear

[Phantom409]

I talked to Pace today.

We have come up with 4 things:

Your bracket may have to be adjusted where your linkage hooks up to the trans.
Recheck all your connections again.
Check that SES light.
Might be the tune but make sure you rule out any manual errors before calling the tuner.

[MORNINGSTAR2101]

so, she starts!!! and sounds ****ing amazing. but, she doesnt go anywhere. doesnt seem like the trans is engaging. electrical is hooked up and the shifter and torque converter are doin their thing, but the trans... ..not so much. park works but the car can be pushed in every other gear. =/