Tweet
just curious what you guys have done for better air for the motor, make it breathe wanna see how big of air filter people made or routes and ways you piped to get more air.. tryin to get some ideas
-
1994 Z28...LT1, A4, Tune up-(2005) w/ MSD 8.5 wires, K&N CAI F2, Hooker exhaust, TB-bypass, clear turning lense's, cat delete/ 3"pipe install, J&M STB,90'degree silicone elbow, Royal Purple oil, MSD-blastercoil, current Miles~[130,000].. hawk pads,performance rotors.url]http://www.myspace.com/camerz2894[/url] -
In my old 93 LT1 I put a piece of 90 degree angle rain gutter where the shroud is to get to the parking lights. I cut a hole in it and ran it up.
Ask if you have any questions...I didn't get it dynoed or anything but it couldn't of hurt it any...2002 Z28 Camaro A4
1993 Z28 Camaro M6- SOLD
1999 Z28 Camaro M6- SOLD
2008 Ford Fusion SE - DD
-- MCALUS MOLDED PILLAR PODS, PM ME FOR MORE INFO--
sigpic -
Not an f-body... but last year in my vo-tech class... we dynoed a Thunderbird turbo coupe... Had the turbo off a big cummins...what he had done for an intake is got plastic PVC pipe... 3'' or 4'' and ran it down to below the car.... then was planning to take it and have it mandrel bent out of Stainless... That car built on a budget and sounded awesome on the dyno... Massive straight pipes you could hear the turbo wind up it was kick ass.
But thats an idea if you have room under the hood.. But if you still have all your emissions and AC good luck with that option.1989 Chevrolet Camaro- Currently in pieces...Comment
-
Yea I was going to say PVC pipe too...I did that back in the day when I had my supercharged T-Bird, nice 4" piping...I'm sure it's better flow than a rain gutter, lol. Came off the air filter box and went down to the hole where the fog light was...It was nice too b/c they make a lid for the pipe for like drains or something and I put that on the end to keep as much debree out as I could. Worked great and cost maybe $10...custom ram air! lol98 Trans Am WS.6
Cam
Heads
Intake
Full exhaust
More mods to comeComment
-
2002 Z28 Camaro A4
1993 Z28 Camaro M6- SOLD
1999 Z28 Camaro M6- SOLD
2008 Ford Fusion SE - DD
-- MCALUS MOLDED PILLAR PODS, PM ME FOR MORE INFO--
sigpicComment
-
Yes Cheap... However works wonders.Originally posted by mcalus View Post1989 Chevrolet Camaro- Currently in pieces...Comment
-
Here's a crazy setup that was on the car when I bought it...kinda nice because it really brought out the whine of the S/C.98 Trans Am WS.6
Cam
Heads
Intake
Full exhaust
More mods to comeComment
-
yea i'm wanting to see how people have it splitting off to each side from the TB
1994 Z28...LT1, A4, Tune up-(2005) w/ MSD 8.5 wires, K&N CAI F2, Hooker exhaust, TB-bypass, clear turning lense's, cat delete/ 3"pipe install, J&M STB,90'degree silicone elbow, Royal Purple oil, MSD-blastercoil, current Miles~[130,000].. hawk pads,performance rotors.url]http://www.myspace.com/camerz2894[/url]Comment
Comment