Announcement

Collapse
No announcement yet.

Question for 4th gen. T/A and Firebird guys

Collapse
X
Collapse
Who has read this thread:
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Question for 4th gen. T/A and Firebird guys

    The interior light on my door panel is burned out, the little red one that lights up the window and lock buttons. I took the door panel off to check it out and I can't seem to get the bulb out. Didn't want to break anything b4 I know what the deal is.

    Does anybody know if this bulb comes out or do I have to go buy the whole socket and bulb together?
    98 Trans Am WS.6
    Cam
    Heads
    Intake
    Full exhaust
    More mods to come

  • #2
    If its the same as on the camaro it comes out.
    1999 Camaro - 6 liters of fury.....

    Comment


    • #3
      should just twist to the left and pull out

      '96 Camaro RS - project
      '97 Silverado Z71 - DD
      '89 Suzuki GSXF 750




      Comment


      • #4
        its a tiny bulb it is hard to remove just use some needle nose pliers, if it breaks just pull it out by the internals
        99 Grand Prix GT - Winter Ride

        ___M&R Electronics ___
        .MECP & ASE Certified.

        Comment


        • #5
          Originally posted by SlyStoner421 View Post
          its a tiny bulb it is hard to remove just use some needle nose pliers, if it breaks just pull it out by the internals
          Yea I tried yanking on it with my finger's, but didn't move. I'll have to try some pliers. Thanks.
          98 Trans Am WS.6
          Cam
          Heads
          Intake
          Full exhaust
          More mods to come

          Comment


          • #6
            So I tried the pliers and it kept slippin off, so I decided I was going to just break it. I start to put more pressure to break it and it just came out instead. Sweet, now I need to get the bulb...thanks guys.
            98 Trans Am WS.6
            Cam
            Heads
            Intake
            Full exhaust
            More mods to come

            Comment


            • #7
              lol ..breaking things is always fun..especially if they are very very cheap

              Comment


              • #8
                Originally posted by LS1Phoenix View Post
                So I tried the pliers and it kept slippin off, so I decided I was going to just break it. I start to put more pressure to break it and it just came out instead. Sweet, now I need to get the bulb...thanks guys.
                haha i had the same problem removing the front turn signal bulbs. pulled gently and nothing, so i screw it and yanked hard on the bulb and they came right out.
                2000 Firebird A4 black hardtop
                intake/exhaust, fuel/ignition, pcm retune, rims/tires
                ~Phil

                Comment

                Working...
                X