Need 98-99 LS1 throttlebody pics

[97rs4life]

I am in need of installed and uninstalled ls1 throttle bodies that are drive by cable. So I believe that would mean 98-99 correct? I want to see how the throttle cables hook up to it and all. Trying to figure out my tb issue for my 3.8 car and the holden intakes I have. Any pics you have would be great. Thanks!

[badinfluence]

I can get you a picture of the TB on my 99 tomorrow or the next day

here is the only pic i have on the comp. right now, its a 98 LS1 TB (this one has the bump stop mod)

[97rs4life]

now they have the IAC valve built in the bottom of them correct? Is there another bracket that goes over the top to hold the tb cables in place?

[badinfluence]

now they have the IAC valve built in the bottom of them correct? Is there another bracket that goes over the top to hold the tb cables in place?

I'm heading out to the garage right now, i'll get some pictures for you

[97rs4life]

thanks.

[badinfluence]

let me know if you need more (didnt realize how dirty my engine is )





bottom

pass. side

drivers side

[97rs4life]

does that cable bracket mount off the intake then? hmm, how can I get that bracket on my setup...tricky

[badinfluence]

yes it is bolted to the intake manifold

[Keego Ridah]

I am in need of installed and uninstalled ls1 throttle bodies that are drive by cable. So I believe that would mean 98-99 correct? I want to see how the throttle cables hook up to it and all. Trying to figure out my tb issue for my 3.8 car and the holden intakes I have. Any pics you have would be great. Thanks!

All 98-02 F-Body throttle bodies are drive by cable

[97rs4life]

All 98-02 F-Body throttle bodies are drive by cable

yup found that out. Also found out that the 98-99 have a different tb cam (halfmoon piece that cable hooks too) than the 00-02. The 98-99 is smaller