Tweet
Has anyone done a fuel pump and a 94 trans am? If so is there anyone that can tell me the easiest way to do it i thought about cutting a hole in the trunk to get to it but i dont want to cut into anything like the fuel lines or the tank itself. Just wondering if someone had a real easy way to do it other then taking the exhaust and panhard rods off to make clearance for the tank to come down. Thanks
-
-
Man, I think you might be SOL on this one, if it were me I wouldn't want to cut a hole in my floor. You could, but I wouldn't. -
It takes about the same about of time to do it either way.Originally posted by firebirdTA20 View Post
So you can do it the RIGHT way by taking the tank out the bottom and removing the pump.
Or the REDNECK HACKER way of HACKING a hole in the floorand removing the pump.
I personally recommend the 1st way.
Last edited by WMCC Gary; September 5th, 2007, 01:55 PM.Western Michigan Camaro Club ~ President
1987 Camaro IROC-Z Pearl White & Black w/ Red Pearl, 355 TPI, A4, 3:42, AirRide,"GOMARO"2017 Silverado Double Cab Z71 Pepperdust Metallic, 5.3, A6, 3:42, "SASYZ71"WMCC Website www.wmcamaro.org
2005 Pontiac Grand Prix GT White, 3800
"A government big enough to give you everything you want,
is strong enough to take everything you have." — Thomas Jefferson
"Democracy will cease to exist when you take away from those who
are willing to work and give to those who would not." — Thomas Jefferson
Comment
-
thats the way i would do it !!!Originally posted by WMCC Gary..So you can do it the RIGHT way by taking the tank out the bottom and removing the pump...Comment
-
i suppose the right way would be the best its already half tore apart just have to get the panhard rods off then drop the tank. Thanks guys.Comment
Comment