1ST gen, So what's next with your car ? (winter project)

[skar]

So what's next with your car ? (winter project)
Mine is in deep storage for the winter (car bag)
Adding a sway bar in the back come spring. ? can any body tell me if it worth going to a over sized bar on front. Or stick with the stock one. On my 68. thanks

PS this 1st gen, site is slow lets pick it up some. (more post)

[TSTONE]

same here - mine are out of commision till spring

projects:

Camaro -

1. install electric fan setup
2. install th350 setup
3. recover door panels
4. install power top motor

Trans Am -

1. install decal set
2. redo dash bezel
3. repair radio & 8trk
4. refinish spare rims
5. detail engine compartment

im sure there will be lots of other things - its going to be a long winter

[skar]

The wife got transferred . Less $ And no OT for me .
So only small things for me to do to the car. Looks like the new 383 will have to wait. Also we are putting more in to my daughters college fund.
Good thing the car only needs small things or up grades.

[skar]

Todd why the th350 setup not a 700R ?

[TSTONE]

Camaro is mainly finish-ups, i already have everything i need parts wise with the exception of the door panels - which will probably have to wait for awhile

Trans Am projects will probably be whittled down to the decal kit as it's over 500.00

can always dream though right?

[TSTONE]

Todd why the th350 setup not a 700R ?

already have a fresh tci race built th350 taking up space in the garage & its a direct swap

[skar]

Cant even imagine having two money pits.

[csmith4153]

What I would like to do and what I'm going to do is two different things.
I have a whole list of things, but no money = nothing.

[JoeliusZ28]

Redo the exhaust system, fix some odds and ends.

If i even do that, right now im debating leaving the car uninsured for a year while I do some financial recovering.

edit: oops, didnt realize this was a 1st gen thread at first.

[Kwazrollinz28]

i think my dads 69 z28 is gonna sit for another 20 years hahahahah

[skar]

i think my dads 69 z28 is gonna sit for another 20 years hahahahah

Sounds like a future project for you.

[CHEV 383]

Since my summer project did not get completed - get Camaro running, that will be the winter project. Set valves, install front end of motor, install intake and carb, radiator, hoses, wiring, etc.

[CHEV 383]

can any body tell me if it worth going to a over sized bar on front. Or stick with the stock one. On my 68. thanks

Measure the one you have. I was looking and ready to purchse a 1 1/8" sway bar kit but then found out that my car already had a 1" sway bar. I think it is worth it if you car has a small diameter one on it and you want it to handle better.

[skar]

I would say it is 3/4 stock I think. Car is in a storage bag must wait until spring.
Thanx

[Kwazrollinz28]

Sounds like a future project for you.

I don't want any part of that,

Its a 302 Z28 camaro, he has The full leather interior, all the Z/28 tags and the RS stuff to, Headlights, grill, tags you name it, and he has a 427 sitting around for it to.

I'm not playing around with it, the car has zero rust but, I've offered he doesn't want to work on it