Tweet
you guys know if a pair of 69 rear seats would fit a 4th gen?dementions of the older seats would be helpful to see if they'd fit i'd like to have the bench like seat in the back.. anyone want to make a trade.. with 4th gen seats?
-
1994 Z28...LT1, A4, Tune up-(2005) w/ MSD 8.5 wires, K&N CAI F2, Hooker exhaust, TB-bypass, clear turning lense's, cat delete/ 3"pipe install, J&M STB,90'degree silicone elbow, Royal Purple oil, MSD-blastercoil, current Miles~[130,000].. hawk pads,performance rotors.url]http://www.myspace.com/camerz2894[/url] -
I have no idea but good luck. Theres only a hand full of 1st gen's on the site.1998 Chevrolet Camaro Z28 - 6 Speed -
hmm...not a damn clue
for the 1st gen wizards
Comment
-
still trying to find dimensions - what makes you want those - cant picture them in a 4th gen?
13th!!! Annual Michigan FBody Meet & Greet Car Show 2017
June 10th, 2017 - 9am to 3pm!!!
Bakers of Milford, Milford, MI
Classics only cost alot if you add up what you spend!
sigpic
"The winner ain't the one with the fastest car, it's the one who refuses to lose."- Dale Earnhardt -
Comment
-
heres what ive found so far
Long seat - std interior
Back rest top - 49"
Back rest middle - 52"
Back rest bottom - 54"
bottom front - 54.5"
bottom middle - 54"
bottom rear - 44"
Short seat - deluxe fold down
Back rest top - 46.5"
Back rest middle - 46.5"
Back rest bottom - 44.5"
bottom front - 48"
bottom middle - 47"
bottom rear - 44"
13th!!! Annual Michigan FBody Meet & Greet Car Show 2017
June 10th, 2017 - 9am to 3pm!!!
Bakers of Milford, Milford, MI
Classics only cost alot if you add up what you spend!
sigpic
"The winner ain't the one with the fastest car, it's the one who refuses to lose."- Dale Earnhardt -
Comment
-
Never seen anybody put a 1st gen rear into a 4th gen, but my guess is that it would not fit too well. I'm guessing the bench would sit too high to go over the driveshaft tunnel, and anyone taller than a 6 year old would be banging their head on the roof...even worse than it is now.Originally posted by Camaroz2894 View Post
Plus you wouldn't have a middle seat belt...you'd have to fab some mounting points...Originally posted by Redd8407Originally posted by Z28ISGR8Originally posted by DarrenComment
-
I know when I researched a 70 z28 build where they put in 4th gen rear seats that the widths were different and they had to do some customizing to make it work as the width and such were different. I would imagine trying to put 1st gen seats in a 4th gen would be the same issue.------------------------------------------
2004 GMC Envoy - Tuned, Airraid Intake, rest stock
2005 Malibu - Stock, anyone have a ecotec factory gm supercharger for me? lol
5th gen Camaro V6 Forums
http://www.bowtiev6.comComment
-
I never seen any 1st gen seats in a 4th? Thats a big year difference..usually see 3rd with 4th swapsComment
-
yea i know.... but i like the whole bench idea... rather then having a space in the middle with not even an armrest or anything.... you can get pair older rear seats for not a bad price.. plus it's real black leather looks sweet... get those rear seat delete boxes make them alittle shorter and should clear the tunnel better
1994 Z28...LT1, A4, Tune up-(2005) w/ MSD 8.5 wires, K&N CAI F2, Hooker exhaust, TB-bypass, clear turning lense's, cat delete/ 3"pipe install, J&M STB,90'degree silicone elbow, Royal Purple oil, MSD-blastercoil, current Miles~[130,000].. hawk pads,performance rotors.url]http://www.myspace.com/camerz2894[/url]Comment
-
I don't believe a bench seat is a terribly difficult thing to build from scratch. The pre-'49 crowd does it all the time. I suspect that would be easier than modifying a '69 bench to fit your application.
If you don't want all that trouble, consider measuring your available space and mounting points, then going to your local junkyard and finding out what benches might be good swaps. Sure, the car might end up with a Dodge Caravan seat in the back, but if you or a loved one is handy with a sewing machine nobody will be able to tell after you've gotten it all installed and finished.
-Dave1968 Camaro convertible. L79/M21.
One-of-none "Hurst Edition"
1975 Ford Green Glow Metallic
Black over-the-door SS stripe
Black top, Ivy Gold Deluxe interiorComment
-
Originally posted by Camaroz2894 View Post
???
i dont believe leather was ever an option on first gens?
13th!!! Annual Michigan FBody Meet & Greet Car Show 2017
June 10th, 2017 - 9am to 3pm!!!
Bakers of Milford, Milford, MI
Classics only cost alot if you add up what you spend!
sigpic
"The winner ain't the one with the fastest car, it's the one who refuses to lose."- Dale Earnhardt -
Comment
-
Or second gens...first year for leather was 1987 I believe...Originally posted by TSTONE View PostOriginally posted by Redd8407Originally posted by Z28ISGR8Originally posted by DarrenComment
-
it's just an idea i'd like to make possible sometime..
1994 Z28...LT1, A4, Tune up-(2005) w/ MSD 8.5 wires, K&N CAI F2, Hooker exhaust, TB-bypass, clear turning lense's, cat delete/ 3"pipe install, J&M STB,90'degree silicone elbow, Royal Purple oil, MSD-blastercoil, current Miles~[130,000].. hawk pads,performance rotors.url]http://www.myspace.com/camerz2894[/url]Comment
-
I think it would look strange. But ya never know.[SIGPIC][/SIGPIC
Stainless works headers/cats Roto fab CAI /
Corsa install and tune Livernois
TSW Nuburgring 9 &10" x 20 on Invos (315 & 275 )
JL Audio XD400/4 amp
Pfadt trailing arms & tie rods sway bars.
pedders street 1 packageComment
-
There's a reason 3rd and 4th gens have buckets on the bottom and a bench type back...THAT BIG FLOOR HUMP! It's gonna look retarded and out of place with a bench bottom in there, plus you lose the ability to flip down the seat back if you put a bench bottom since it will have to sit up so high. You're gonna have a huge gap under the seat to fill with a bench botttom sitting on the floor hump. Nobody but a small kid will be able to sit back there. The stock bucket bottoms are sitting on the floor and there's still not much headroom sitting there.Comment
Comment