Announcement

Collapse
No announcement yet.

Why don't you fix your RS Headlight Doors?

Collapse
X
Collapse
Who has read this thread:
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #31
    Originally posted by WMCC AL View Post
    Are you sure both actuators are bad? I found that repop headlight switches and the vacuum relay valves, suck! (Pun intended) My experience was alot of them leak internally and therefore, don't work well. I went through 3 repop switches and ended of restoring the original one. Do the doors work if you connect them directly to a stable vacuum source? You may also be surprized at the difference in you car performance, once all the unknown leaks are fixed.
    Put in a new switch. The guy who had the car before me put in new after market actuators. NPD catalog says there are some bad new out there.
    I took mine off the car and it takes a hole lot to move them in and out.
    10 12 pounds of vacuum wont do it.
    [SIGPIC][/SIGPIC
    Stainless works headers/cats Roto fab CAI /
    Corsa install and tune Livernois
    TSW Nuburgring 9 &10" x 20 on Invos (315 & 275 )
    JL Audio XD400/4 amp
    Pfadt trailing arms & tie rods sway bars.
    pedders street 1 package

    Comment


    • #32
      Originally posted by skar View Post
      Put in a new switch. The guy who had the car before me put in new after market actuators. NPD catalog says there are some bad new out there.
      I took mine off the car and it takes a hole lot to move them in and out.
      10 12 pounds of vacuum wont do it.
      I hope you meant 10-12 inches of Vacuum. Like I said earlier, there is lots of bad repop stuff out there.

      Comment


      • #33
        yes
        [SIGPIC][/SIGPIC
        Stainless works headers/cats Roto fab CAI /
        Corsa install and tune Livernois
        TSW Nuburgring 9 &10" x 20 on Invos (315 & 275 )
        JL Audio XD400/4 amp
        Pfadt trailing arms & tie rods sway bars.
        pedders street 1 package

        Comment

        Working...
        X