Announcement

Collapse
No announcement yet.

Check out these 4th Gen Camaros

Collapse
X
Collapse
Who has read this thread:
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Check out these 4th Gen Camaros





    Here's the info on them from the guy who took the pics..
    Both are 4th Gens, 2000 and 2001 I think what they said. These are NOT kits, all custom work. I talked to the guys for about 30 minutes about all they done to get these results. It is bodywork at its finest. Everything on the car that is from a 69 is reproduction parts that they ordered and worked/cut to fit their needs. The front and rear clip is exaclty like the one you would see on a 69. Fenders are reproduction ones cut and formed to fit, just like the quarters. Hood is an aftermarket one made for a 69 but cut to fit length wise. I was talking and one owner said he had a 69 Camaro but wanted the modern comforts and performace with the classic look and this was cheaper than modifying the 69 to fit that need.
    sigpic
    U.S. Army 1983-2005
    11.20@122.37 1.51 60'

    Originally posted by WMCCjames

    "Plans Subject to change upon Sobering up"

  • #2
    They've been featured in a number of articles...I think the only thing they keep from the body of the 4th gens is the doors.

    A bit pricey...the ones on eBay have been asking for $80K+.
    Originally posted by Redd8407
    I WANT NOISE! SPEED! AN ENGINE THAT SHAKES MY INTERNAL ORGANS LIKE THEY GOT PARKINSON'S! I DONT WANT AN ENGINE THAT IS PARTIALLY POWERED BY MY LAPTOP BATTERY!
    Originally posted by Z28ISGR8
    WHY THE F*CK IS THERE A GOAT ON A FERRARI?
    Originally posted by Darren
    I think it is because I take it in and out all the time, the rubber has just stretched out, especially at the bottom where it is really thin. It annoys me more then anything.

    Comment


    • #3
      I likem' ..Nicely done ....

      **** FEAR THIS ! ***

      Comment


      • #4
        i can appreciate the work that went into them but im just not a big fan

        for what theyve got in them you could have rebuild a really badazz protouring 1st gen

        13th!!! Annual Michigan FBody Meet & Greet Car Show 2017
        June 10th, 2017 - 9am to 3pm!!!
        Bakers of Milford, Milford, MI



        Classics only cost alot if you add up what you spend!

        sigpic

        "The winner ain't the one with the fastest car, it's the one who refuses to lose."
        - Dale Earnhardt -


        Comment


        • #5
          I don't mind them at all, kinda cool.
          Gone but not forgotten: 1986 Chevrolet Camaro IROC-Z

          "You shall ride eternal. Shiny and chrome."

          Comment


          • #6
            IMO, that is absolutly horrid.

            2011 Mustang GT
            20" Satin Black AMRs with 305/35 & 275/35 MT Street Radials, Saleen Grille, CS Lower Valance, Roush Axleback, GT500 Spoiler, resonator delete

            In Progress: Brembo 6-piston brake upgrade


            Comment


            • #7
              Nice looking rides



              VicePresident of West Michigan Firebird Club
              A.K.A The Maverick
              http://www.cardomain.com/ride/660128/1
              93 TA Currently Under Construction AGAIN
              2007 2500 Chevy Silverado Crew Cab w/ 6.0L & 3.73's

              Comment


              • #8
                You can deff. see the 4th gen. But still great work.

                Comment


                • #9
                  Originally posted by TSTONE View Post
                  i can appreciate the work that went into them but im just not a big fan

                  for what theyve got in them you could have rebuild a really badazz protouring 1st gen
                  :X2:.........or just wait for a 5th gen!?
                  West Michigan Pontiac Club



                  "A Camaro looks like it can kick your a**, a Trans Am is coming over to do it"

                  Comment


                  • #10
                    Looks nice, but I wonder how they look with the tops up?
                    1999 Camaro - 6 liters of fury.....

                    Comment


                    • #11
                      Very cool, but you can buy the whole 69 Z28 body and all the doors, hood, lamps ect and put modern drive-train under it... I think they just wanted to show their mad skills workin the body...


                      "ANY car can be an SS but ONLY a Camaro can be a Z28!" Scott S.

                      "Owning a 9 second import is like coming out of the closet. At first you surprise everyone, but in the end you're still gay!"

                      Comment


                      • #12
                        I love the look of those! I couldn't even believe the amount of time and effort it took to make those. Even though they are a little pricey it would be an awesome car to have in your collection.
                        - 1988 Camaro IROC-Z
                        2000 5.3L | 4L60E | CAI | No EGR | No Cats | 85MM MAF | Tuned by PCM 4 LESS |
                        2000 Camaro Dash | 1996 TA Console |

                        - 1998 Monte Carlo Z34 (DD)
                        3.8L w/ 180xxx miles and going strong!!!!!

                        Comment


                        • #13
                          I like them a lot
                          2011 Ford Raptor SuperCrew
                          SVT Beadlock Wheels
                          Roush Intake, Corsa Exhaust
                          20" and 40" Light Bars

                          2000 Camaro Z28
                          Stripped Down Drag Car Build

                          Project 1999 Camaro Z28


                          2009 G8 GT Stryker Blue Metallic-SHEGONE
                          Crate LS3, LS9 Cam, LSA Supercharger, Metco Solid Isolator
                          RotoFab Intake, HSRK, Camaro Trans Pan
                          ZL1 HX, ZL1 Fuel Pump, CTS-V Lid, LSA Injectors
                          Pat G - 93 Octane Tune
                          Kooks 1-7/8" Longtubes, High Flow Cats, X Pipe, Solo AxleBacks
                          CTS-V Calipers, Brembo Pads
                          H&R Lowering Springs, Whiteline Bushings, FE3 Struts/Shocks, Camaro 20" Wheels
                          HIDs, LED Conversion, Atari Gauges, Tint, Roof Carbon Fiber Wrapped, Innovative Wideband

                          2.55 Lingenfelter Pulley and Injectors waiting to go on!
                          sigpic

                          Comment


                          • #14
                            I have to admit, they look great . . . I too question the time and $$ spent, but then again, if it's what you love . . . go for it!
                            sigpic

                            Stock 1998 T/A, original owner


                            17 years and 18,664 miles . . . still lovin' it

                            Comment


                            • #15
                              wow thats cool. i relly like the red one.
                              sigpic
                              Sold!
                              www.fquick.com/lozanoa11
                              94 Grand Cherokee (sold)
                              95 Accord(for sale)
                              99 Outback (snow destroyer)

                              Comment

                              Working...
                              X