Announcement

Collapse
No announcement yet.

It's making progress!!!

Collapse
X
Collapse
Who has read this thread:
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    UPDATE!!!

    A few pictures from a morning photo shoot since I was early for class. First one was taken in front of the Walter P. Chrysler museum (ironic, right?), the rest were taken in front of some dumpsters in the OCC parking lot.









    AND in a late-night work session, one of my wheels has been striped! I think it looks really good, and will definitely set my car apart from the rest, which is one thing I'm really going for. I like to be tasteful, so I'm using all the small details I can to really pull my car together into something that has never been seen before. Anyway, enough with my goals for the car, PICTURE TIME!!!



    Yes, taking non-flash pictures of deep black wheels is tough, but I think you get the idea. Wheels should be mounted this weekend, if not, my head may explode.
    sigpic
    www.BroughtonAutomotive.com

    www.fquick.com/Camaro_Driver_19

    Comment


    • #17
      Looks awesome!
      Gone but not forgotten: 1986 Chevrolet Camaro IROC-Z

      "You shall ride eternal. Shiny and chrome."

      Comment


      • #18
        howd you do that stripe?
        2011 Ford Raptor SuperCrew
        SVT Beadlock Wheels
        Roush Intake, Corsa Exhaust
        20" and 40" Light Bars

        2000 Camaro Z28
        Stripped Down Drag Car Build

        Project 1999 Camaro Z28


        2009 G8 GT Stryker Blue Metallic-SHEGONE
        Crate LS3, LS9 Cam, LSA Supercharger, Metco Solid Isolator
        RotoFab Intake, HSRK, Camaro Trans Pan
        ZL1 HX, ZL1 Fuel Pump, CTS-V Lid, LSA Injectors
        Pat G - 93 Octane Tune
        Kooks 1-7/8" Longtubes, High Flow Cats, X Pipe, Solo AxleBacks
        CTS-V Calipers, Brembo Pads
        H&R Lowering Springs, Whiteline Bushings, FE3 Struts/Shocks, Camaro 20" Wheels
        HIDs, LED Conversion, Atari Gauges, Tint, Roof Carbon Fiber Wrapped, Innovative Wideband

        2.55 Lingenfelter Pulley and Injectors waiting to go on!
        sigpic

        Comment


        • #19
          Vinyl tape I got of ebay. It's 1/4 inch wide, comes in 4 pre-curved sections. Works great, I hit the lip of the wheel with rubbing alcohol to make sure as little oil as possible was on the wheel before I stuck the vinyl on. It looks amazing, it's not perfect, but unless you're getting up REAL close and nit-picking like crazy you would never know.
          sigpic
          www.BroughtonAutomotive.com

          www.fquick.com/Camaro_Driver_19

          Comment


          • #20
            Well i love the wheels
            sigpic

            Comment


            • #21
              Wow man that wheel looks awesome!
              - Brian Meissen
              Owner, MiFBody.com
              Administrator, LTxTech.com


              1994 Camaro LT1 Transplant - 357ci LT1, cammed, stalled, and driven.
              2022 Camaro LT1 - "Cherry Bomb 2"
              Michigan FBody Meet & Greet Car Show 2022
              June 4th, 2022 - 9am to 3pm!!!
              The HUB Stadium, Auburn Hills, MI

              Comment


              • #22
                Front turn signals have been niteshaded, but I've decided no more update pictures until the wheels are mounted. I can't wait, this thing is going to look AWESOME.
                sigpic
                www.BroughtonAutomotive.com

                www.fquick.com/Camaro_Driver_19

                Comment


                • #23
                  Well, I was bored and I had some aluminum laying around... so I made a switch panel. Now all I need is nitrous!



                  sigpic
                  www.BroughtonAutomotive.com

                  www.fquick.com/Camaro_Driver_19

                  Comment


                  • #24
                    WHEELS ARE ON!!!

                    Took these pics about... half an hour after I finished mounting the wheels. OU parking structure FTW. Yes, the tires kind of look like shit, I was fresh out of tire dressing and far too excited to care. They're better now.













                    I'll take some more pictures in daylight once I get it cleaned up a little bit. She's dusty.
                    sigpic
                    www.BroughtonAutomotive.com

                    www.fquick.com/Camaro_Driver_19

                    Comment


                    • #25
                      looks better than I thought it would!

                      Nice job pulling it off!

                      Comment


                      • #26
                        Thanks! I'm busy polishing the piss out of it in preparation for the M&G but I'll snap some pictures with clean, dressed tires when I'm finished.
                        sigpic
                        www.BroughtonAutomotive.com

                        www.fquick.com/Camaro_Driver_19

                        Comment


                        • #27
                          Just finished polishing and waxing in preparation for the M&G, so she's looking REAL shiny right now. Not an amazing photoshoot like I usually do (for now), but I think you get the idea.











                          BTW, tires are Riken Raptors 275/40/17
                          sigpic
                          www.BroughtonAutomotive.com

                          www.fquick.com/Camaro_Driver_19

                          Comment


                          • #28
                            Looks good man!
                            2011 Ford Raptor SuperCrew
                            SVT Beadlock Wheels
                            Roush Intake, Corsa Exhaust
                            20" and 40" Light Bars

                            2000 Camaro Z28
                            Stripped Down Drag Car Build

                            Project 1999 Camaro Z28


                            2009 G8 GT Stryker Blue Metallic-SHEGONE
                            Crate LS3, LS9 Cam, LSA Supercharger, Metco Solid Isolator
                            RotoFab Intake, HSRK, Camaro Trans Pan
                            ZL1 HX, ZL1 Fuel Pump, CTS-V Lid, LSA Injectors
                            Pat G - 93 Octane Tune
                            Kooks 1-7/8" Longtubes, High Flow Cats, X Pipe, Solo AxleBacks
                            CTS-V Calipers, Brembo Pads
                            H&R Lowering Springs, Whiteline Bushings, FE3 Struts/Shocks, Camaro 20" Wheels
                            HIDs, LED Conversion, Atari Gauges, Tint, Roof Carbon Fiber Wrapped, Innovative Wideband

                            2.55 Lingenfelter Pulley and Injectors waiting to go on!
                            sigpic

                            Comment


                            • #29
                              nice!
                              99 Grand Prix GT - Winter Ride

                              ___M&R Electronics ___
                              .MECP & ASE Certified.

                              Comment


                              • #30
                                Man, that car looks awesome. Good job!
                                - Brian Meissen
                                Owner, MiFBody.com
                                Administrator, LTxTech.com


                                1994 Camaro LT1 Transplant - 357ci LT1, cammed, stalled, and driven.
                                2022 Camaro LT1 - "Cherry Bomb 2"
                                Michigan FBody Meet & Greet Car Show 2022
                                June 4th, 2022 - 9am to 3pm!!!
                                The HUB Stadium, Auburn Hills, MI

                                Comment

                                Working...
                                X