Tweet
In exactly 30 minutes me and a buddy will be swapping my springs and shocks...wish us luck!
-
2011 Ford Raptor SuperCrew
SVT Beadlock Wheels
Roush Intake, Corsa Exhaust
20" and 40" Light Bars
2000 Camaro Z28
Stripped Down Drag Car Build
Project 1999 Camaro Z28
2009 G8 GT Stryker Blue Metallic-SHEGONE
Crate LS3, LS9 Cam, LSA Supercharger, Metco Solid Isolator
RotoFab Intake, HSRK, Camaro Trans Pan
ZL1 HX, ZL1 Fuel Pump, CTS-V Lid, LSA Injectors
Pat G - 93 Octane Tune
Kooks 1-7/8" Longtubes, High Flow Cats, X Pipe, Solo AxleBacks
CTS-V Calipers, Brembo Pads
H&R Lowering Springs, Whiteline Bushings, FE3 Struts/Shocks, Camaro 20" Wheels
HIDs, LED Conversion, Atari Gauges, Tint, Roof Carbon Fiber Wrapped, Innovative Wideband
2.55 Lingenfelter Pulley and Injectors waiting to go on!
sigpic -
Good Luck!!Originally posted by s.reef View Postsigpic
U.S. Army 1983-2005
11.20@122.37 1.51 60'
Originally posted by WMCCjames -
Comment
-
cool you can do mine afterwards
2000 Firebird A4 black hardtop
intake/exhaust, fuel/ignition, pcm retune, rims/tires
~PhilComment
-
So as to not anger the suspension god ill think about itOriginally posted by 00firebird View Postcool you can do mine afterwards
2011 Ford Raptor SuperCrew
SVT Beadlock Wheels
Roush Intake, Corsa Exhaust
20" and 40" Light Bars
2000 Camaro Z28
Stripped Down Drag Car Build
Project 1999 Camaro Z28
2009 G8 GT Stryker Blue Metallic-SHEGONE
Crate LS3, LS9 Cam, LSA Supercharger, Metco Solid Isolator
RotoFab Intake, HSRK, Camaro Trans Pan
ZL1 HX, ZL1 Fuel Pump, CTS-V Lid, LSA Injectors
Pat G - 93 Octane Tune
Kooks 1-7/8" Longtubes, High Flow Cats, X Pipe, Solo AxleBacks
CTS-V Calipers, Brembo Pads
H&R Lowering Springs, Whiteline Bushings, FE3 Struts/Shocks, Camaro 20" Wheels
HIDs, LED Conversion, Atari Gauges, Tint, Roof Carbon Fiber Wrapped, Innovative Wideband
2.55 Lingenfelter Pulley and Injectors waiting to go on!
sigpicComment
-
GL man, careful with dem springs, they can poke an eye out.Mods:
Ram Air Intake (CAI)
K&N Filter
Polished Throttle Body and MAF Sensor
De-screened MAF Sensor
Tightened Throttle Body Cable
Performance Button Setting Changed for Torque
160* HypterTech Thermo
Water Wetter
New Distributor, Plugs, Wires
New Water Pump
LT4 Knock Sensor
Flowmaster 40 Series Muffler
TB AirFoil
Comment
-
I just did struts on my baby ZComment
-
hmm...so i ran out light, okok...motivation, the backs are done and ill wake up at the crack of noon tomorrow to do the fronts, honestly not that hard just time consuming.2011 Ford Raptor SuperCrew
SVT Beadlock Wheels
Roush Intake, Corsa Exhaust
20" and 40" Light Bars
2000 Camaro Z28
Stripped Down Drag Car Build
Project 1999 Camaro Z28
2009 G8 GT Stryker Blue Metallic-SHEGONE
Crate LS3, LS9 Cam, LSA Supercharger, Metco Solid Isolator
RotoFab Intake, HSRK, Camaro Trans Pan
ZL1 HX, ZL1 Fuel Pump, CTS-V Lid, LSA Injectors
Pat G - 93 Octane Tune
Kooks 1-7/8" Longtubes, High Flow Cats, X Pipe, Solo AxleBacks
CTS-V Calipers, Brembo Pads
H&R Lowering Springs, Whiteline Bushings, FE3 Struts/Shocks, Camaro 20" Wheels
HIDs, LED Conversion, Atari Gauges, Tint, Roof Carbon Fiber Wrapped, Innovative Wideband
2.55 Lingenfelter Pulley and Injectors waiting to go on!
sigpicComment
-
The backs take maybe 10 mins, Just unbolt the shocks and it sags enough to pull them right out. Its the fronts that get you everytime.
Comment
-
I did all of mine all by myself in about 3 hours, I didn't think it was that bad....Comment
-
I am late on this, but good luck.Currently Owned F-Bodies
1994 Firebird 3.4L V6 SPI, T5, Black with T-Tops and Leather Interior (Daily Driver)
1985 Trans-Am 383 Stroker Carb., Black with T-Tops (Hobby Car)
1986 Trans-Am 5.0L TPI, Blue with T-Tops. (Project Car)
Comment
Comment