Need Brake help

[cobalt camaro]

Alright so this morning i started on getting my brakes all changed out, everything was going good, until, the rear rotors, for some reason i can not get these things off, checked the haynes manual, says they just pull off, but mine only move maybe an eighth of an inch, and then it sounds like they are fused to the axel shafts. If anyone can help me out that would be sweet, i wanna get this done today.

[SS4Matt]

make sure your e-brake is off...if it's on, that'll make them not come off....if the ebrake is off, and they are just "stuck" take a rubber mallet, or anything really and hit the back side of them, so they come off

[cobalt camaro]

Thanks matt, yea the first thing i checked was the e-brake, and i did try to beat off with a mallet, i'll have to give it another go after lunch.

[81DaytonaPaceCar]

Thanks matt, yea the first thing i checked was the e-brake, and i did try to beat off with a mallet, i'll have to give it another go after lunch.

I'm not quite what to say, other than the depths of my mind must be dark...very dark...

[silver6_maro]

I had the same problem 2 weeks ago when i was taking mine off, i was sure that they were bolted on, but i got a big rubber mallet and hit the heck out of it, and they came off, but it takes a little. One side was easier than the other too

[cobalt camaro]

got em off, took the good old torch and heated up the middle of the rotorsa little bit, and then hit em with the mallet and they came off.

on a side note 81daytonapacecar, you are a sick, sick man.

[silver6_maro]

got em off, took the good old torch and heated up the middle of the rotorsa little bit, and then hit em with the mallet and they came off.

on a side note 81daytonapacecar, you are a sick, sick man.

good to hear you got yours off, i just got my new ones delivered a few minutes ago!!!!

also, i didnt even notice what 81daytona was saying......LOL