help umi torque arm hitting tunnel

[TRY MEH]

i have had one hell of a time figuring out what is going on with my car... hoping to figure this out soon.

i have a moser 12 bolt with umi adjustable torque arm, LCA's, panhardbar,tunnel mount brace w/safety loop...

also have kyb adjustable shocks with stock springs..

were the rear end and torque arm meets its hitting my tunnel when i hit bumps even small ones.. ive adjusted the pinion angle the best i can even tried moving it both ways and it still hits.. not sure what my issue could be everything is tight as it should be.

could it possibly be weak springs?

any help would be awesome guys!!

this is only thing stopping me from driving my car =(

[1BADAIR]

cut the bracket and use the inner holes

[TRY MEH]

what bracket?

any pics if u have same setup?

[farmington]

Does your torque arm have two sets of axle mounting holes? Contact umi they should be able to tell u if u need to cut off part of the mounting surface so you can use the other set of holes

[1BADAIR]

http://ls1tech.com/forums/gears-axle...bolt-help.html

[TRY MEH]

awesome so glad its something simple!!! thanks guys ill get this done ASAP!! im sure it will fix my issue