Rear end clunk?

[sman]

Swapped in founders long TQ arm and pan hard rod, along with umi relocation brackets shortly before the dyno day.

Ended up breaking the lower eye shock mount bolt on one of my bilstiens, so I got a universal from AutoZone. Seemed to work pretty well. Also, the bolts that I took off of the panhard rod (factory) wouldn't fit through the new founders bushings, so I matched it up with some hardend stuff at the hardware. The bolt fits great through the panhard rod, but has a tiny bit of movement in the mount on the body.

I noticed in my travels the last week or so that I've got a clunk from the rear of the car that wasn't there before, and its getting louder.....

I have another vehicle on the hoist right now so I can't take an in depth look at the moment, but based on what was said, anyone have any ideas?
Sent from my RM-927_nam_vzw_100 using Tapatalk

[sman]

Had to run to work to take care of an "emergency" it was scary bad, crawled on the ground to see if I could actually see anything out of place or move something around.

Found this guy hanging by a thread, bouncing off of the passenger rear spring. Fingers crossed when I leave in a few. Hopefully this was all it was....

Sent from my RM-927_nam_vzw_100 using Tapatalk

[BP_Z28]

Rear end clunk?

Both of them broke off on my 94. Made the coolest clunk noise I have ever heard. Right before the car committed suicide lol

Here's what I saved on tech for a future reference


http://m.ls1tech.com/forums/showthread.php?t=1708763


Sent from my iPhone using Tapatalk