Wheel fitment help!

[sweet_87_iroc]

Looking for rim for my 87 iroc. I found a setup and am looking for an expert to help me out. I don't want to run spacers!
The front is:
Offset: 15
Bolt Pattern: 5x120
Rim Width: 8.5
Hub Bore: 72.56
Rim Diameter: 18




The rear is:
Offset: 15
Bolt Pattern: 5x120
Rim Width: 9.5
Hub Bore: 72.56
Rim Diameter: 18






Thanks

[hoogiesngrinderz]

I assume the 15mm offset is positive? Stock IROC rims are 0mm front, +16mm rear but with a 8" width.

You should be able to fit them on a third gen, may rub in the front on tight turns and rear will be closer to the lip.

Edit: Stock rears might be +20mm. Can't remember for sure off the top of my head