93-97 Camaro Front Bumper Cover Removal

[meissen]

Disclaimer: This article is being re-hosted on Michigan FBody Association. The site does not claim ownership of the articles in this section if this disclaimer is included. If you are the original owner of this article and wish for it to be removed, simply use the "Contact Us" link at the very bottom right corner of the web page and we will promptly remove the article.


93-97 Camaro Front Bumper Removal

Items & Tools Needed:
Protective Eyewear
WD-40 / Never Seize
7 mm Socket
10 mm Socket
Pliers
Small Flat-head Screwdriver

Step #1:

*Note - There is also a set of (3) of these snaps on the underside of the bumper cover that must be removed,
they are highly visilble once you are under the car.
Dsc00654s.jpg

Splash_Guards_Removed_s.jpg

Step #2:

Dsc00659s.jpg

Step #3:

Step_6s.jpg
Step_3s.jpg

Step #4:

Dsc00651s.jpg

Step #5:

:Dsc00650s.jpg
Dsc00653s.jpg

Step #6: - Pull bumper cover towards you on each end and remove

Bumper_Cover_Removed_2_s.jpg
Guide By: George Kern IV
s/n: BIGKernel44
CamaroZ28.com, Z28.com, F-Body Hideout


Disclaimer: This article is being re-hosted on Michigan FBody Association. The site does not claim ownership of the articles in this section if this disclaimer is included. If you are the original owner of this article and wish for it to be removed, simply use the "Contact Us" link at the very bottom right corner of the web page and we will promptly remove the article.

[Blacksmith]

Hello! Please for some reason i cannot see pictures and i need to remove my bumper 1996 v8 camaro

Anyway you can send them to me?

[MP81]

I just went through and made the pictures copied and referenced locally - can you see them now?

meissen, do you know why the pics weren't showing, even though the image links are still valid?

[DynoDave]

I can see them now Kyle. Hopefully Oliver can as well.

[MP81]

Sweet! Brian nor myself could figure out why they weren't showing up - they're correct in the source code of the post, and the image URLs are still valid, but in the post they were showing as a 0x0 pixel image, that couldn't be resized. I'm going to say it's some bug from the vB5 update.

[DynoDave]

Could be.

I'm having a similar problem with my ProBoards forum. A year or so back I expanded on the "stock" selection of smileys, by linking to a bunch at another site (designed for that purpose). Worked for a long time. But now, all of those linked smileys don't work. I can go into the original address I linked to, and they are still there. The site is still up and running...so I don't

[Blacksmith]

I can now! Thank you so much appreciate it

[MP81]

Not a problem - let us know if you run into any other similar issues!