Spark Plug Reference Chart

[Orange Terror]

This list was compiled and created by a member of LS1TECH and I just thought it would be good to have here on our site for reference. Seeing as we are an Fbody site I cut out the mustang engine list and others not relating. With that being said, if you want to see the whole list here is the thread link.

http://www.ls1tech.com/forums/showth...ght=SPARK+PLUG

Spark Plug Info

**Note: Heat ranges are determined by NGK standards. Not all plug manufacturers follow the same guidelines.

***Note: List is intended for reference only. Please consult with head mfg. and ignition mfg. for proper gap.

****Note: NGK IX and Denso plugs are Iridium.

LT1
Thread – 14mm
Reach - .708”
Socket – 5/8 hex
Seat - Taper
Stock Heat Range: 5
Gap: .050
Plug: NGK TR55 (stock number 3951); NGK TR55IX (stock number 7164); Autolite 764; Champion RS14YC6 (stock number 13); Denso IT-16 (stock number 5325)

Nitrous (one step colder)
Heat range: 6
Gap: .035 - .038
Plug: NGK TR6 (stock number 4177); NGK TR6IX (stock number 3689); Autolite 103; Denso IT-20 (stock number 5326)

Nitrous (two steps colder)
Heat Range: 7
Gap: Consult
Plug: NGK BR7EF (stock number 3346); NGK TR7IX (stock number 3690); Autolite AR94; Denso IT22 (stock number 5327)


LT1 w/ AFR heads
Thread – 14mm
Reach – 3/4”
Socket – 5/8 hex
Seat – Gasket
Stock – MFG Recommendations
Heat Range: 9
Gap: Consult ignition mfg.
Plug: NGK 5672A-9 (stock number 7405); Autolite AR3910; Champion C59YC (stock number 792); Denso IQ27 (stock number 5315); Denso IQ01-27 (stock number 5708)(diagonal platinum ground); Denso IQ02-27 (stock number 5711)(horizontal platinum ground)

Nitrous (one step colder)
Heat Range: 10
Gap: Consult ignition mfg.
Plug: NGK 5672A-10 (stock number 7942); Autolite AR50; Denso IQ31 (stock number 5323)

Nitrous (two steps colder)
Heat Range: 11
Gap: Consult ignition mfg.
Plug: Denso IQ34 (stock number 5324)


LT1 w/ Trick Flow & Edelbrock Heads
Thread – 14mm
Reach – 3/4”
Socket – 5/8 hex
Seat – Gasket

Stock – MFG Recommendations: approx under 9:1 compression
Heat Range: 4
Gap: Consult ignition mfg.
Plug: NGK FR4 (stock number 5155); NGK BKR5EIX (stock number 6341); Autolite 3926; Champion RC12YC (stock number 71); Denso IK16 (stock number 5303)

MFG Recommendations: approx 10.5:1 compression
Heat Range: 5
Gap: Consult ignition mfg.
Plug: NGK FR5 (stock number 7373); Autolite AR3924 (Racing Plug); Autolite 3924; Champion RC9YC (stock number 2075); Denso K20PR-U (stock number 3145); Denso IK20 (stock number 5304)

MFG Recommendations: approx 11:1 compression
Heat Range: 8
Gap: Consult ignition mfg.
Plug: NGK R5672A-8 (stock number 7173); Autolite AR3911; Champion C63YC (stock number 796); Denso IQ24 (stock number 5314)

MFG Recommendations: approx 12:1 compression
Heat Range: 9
Gap: Consult ignition mfg.
Plug: NGK R5672A-9 (stock number 7405); Autolite AR3910; Champion C61YC (stock number 785); Denso IQ27 (stock number 5315)

MFG Recommendations: approx 13:1 compression
Heat Range: 9 - 10
Gap: Consult ignition mfg.
Plug: NGK R5671A-9 (stock number 5238); Autolite AR3933; Champion C59CX (stock number 296); Denso IK27 (stock number 5312)

MFG Recommendations: approx 14:1 compression
Heat Range: 10
Gap: Consult ignition mfg.
Plug: NGK R5671A-10 (stock number 5820); Autolite AR3932; Champion C57CX (stock number 295); Denso IK-31 (stock number 5321)

**NOTE: Use chart for static compression and adjust heat range for nitrous use accordingly.



LS1 Stock and AFR
Thread – 14mm
Reach - .708”
Socket – 5/8 hex
Seat - Taper
Stock Heat Range: 5
Gap: .060
Plug: NGK TR55 (stock number 3951); NGK TR55IX (stock number 7164); Autolite 764; Denso IT-16 (stock number 5325)

Nitrous (one step colder)
Heat Range: 6
Gap: .035 - .038
Plug: NGK TR6 (stock number 4177); NGK TR6IX (stock number 3689); Autolite 103; Denso IT-20 (stock number 5326)

Nitrous (two steps colder)
Heat Range: 7
Gap: Consult
Plug: NGK BR7EF (stock number 3346); NGK TR7IX (stock number 3690); Autolite AR94; Denso IT22 (stock number 5327)

Nitrous (two and a half steps colder)
Heat Range: 8
Gap: Consult
Plug: NGK R5724-8 (stock number 7317); NGK TR8IX (part number 3691); Denso IT-24 (stock number 5328)

Nitrous (three steps colder)
Heat Range: 9
Gap: Consult
Plug: NGK R5724-9 (stock number 7891); Autolite AR93; Denso IT-27

Nitrous (four steps colder)
Heat Range: 10
Gap: Consult
Plug: NGK R5724-10 (stock number 7993); Autolite AR92


LS1 w/ Edelbrock and Dart Heads
Thread – 14mm
Reach – 3/4”
Socket – 5/8 hex
Seat – Gasket

Stock – MFG Recommendations: approx under 9:1 compression
Heat Range: 4
Gap: Consult ignition mfg.
Plug: NGK FR4 (stock number 5155); NGK BKR5EIX (stock number 6341); Autolite 3926; Champion RC12YC (stock number 71); Denso IK16 (stock number 5303)

MFG Recommendations: approx 10.5:1 compression
Heat Range: 5
Gap: Consult ignition mfg.
Plug: NGK FR5 (stock number 7373); Autolite AR3924 (Racing Plug); Autolite 3924; Champion RC9YC (stock number 2075); Denso K20PR-U (stock number 3145); Denso IK20 (stock number 5304)

MFG Recommendations: approx 11:1 compression
Heat Range: 8
Gap: Consult ignition mfg.
Plug: NGK R5672A-8 (stock number 7173); Autolite AR3911; Champion C63YC (stock number 796); Denso IQ24 (stock number 5314)

MFG Recommendations: approx 12:1 compression
Heat Range: 9
Gap: Consult ignition mfg.
Plug: NGK R5672A-9 (stock number 7405); Autolite AR3910; Champion C61YC (stock number 785); Denso IQ27 (stock number 5315)

MFG Recommendations: approx 13:1 compression
Heat Range: 9 - 10
Gap: Consult ignition mfg.
Plug: NGK R5671A-9 (stock number 5238); Autolite AR3933; Champion C59CX (stock number 296); Denso IK27 (stock number 5312)

MFG Recommendations: approx 14:1 compression
Heat Range: 10
Gap: Consult ignition mfg.
Plug: NGK R5671A-10 (stock number 5820); Autolite AR3932; Champion C57CX (stock number 295); Denso IK-31 (stock number 5321)

**NOTE: Use chart for static compression and adjust heat range for nitrous use accordingly.

[phoenix_rising]

Anything for us 6ers?

[WMCC Gary]

Anything for us 6ers?

Buy a V8!

[phoenix_rising]

LOL I'm thinking about it!!! Kind of like the idea of a V6 SS Eater!!!

[Orange Terror]

Buy a V8!

he he he, sorry man, all there was.

[WMCC Gary]

LOL I'm thinking about it!!! Kind of like the idea of a V6 SS Eater!!!

man had to do it.