Another z/28 project thread

[JoeliusZ28]

Lmao. Nice Joel. When is the event you have? May 7th?

Ah, nope, its april 23rd. I haven't registered yet but I will be. Jonny is already registerred.

http://www.3ballsracing.com/index.ph...ask=view&id=45

[shawnc16]

spectator racing events are nice. Theres basically nobody on the track so you get a lot of WOT time rather than waiting for the straight to pass.

[JoeliusZ28]

spectator racing events are nice. Theres basically nobody on the track so you get a lot of WOT time rather than waiting for the straight to pass.

the 3balls event I was going all out just about 100% of the time. but then again, that day started out with rain so the crowd was lighter.

[1bad83ta]

So after much deliberation I will be buying/building a harness bar. The car really isn't a flat out race car yet and I am hesitant to hurt the resale value of the car. Plus the major reason I was putting a cage in was for the harnesses so it really doesn't make sense.

[JoeliusZ28]

Cages can always be cut out

[white97z28]

my passenger side window is BARELY hanging in there, but i keep putting off replacing it because i keep holding out for those elusive manual regulators and door panels...

I see them in flint and saginaw junk yards all the time and in fact i even have the covers for the window switch already without and switches on them lol

Ah, nope, its april 23rd. I haven't registered yet but I will be. Jonny is already registerred.

http://www.3ballsracing.com/index.ph...ask=view&id=45

Thats a really long way! holy 4 hr trip!

[JoeliusZ28]

I see them in flint and saginaw junk yards all the time and in fact i even have the covers for the window switch already without and switches on them lol

Lol, let me know when you find these parts!

[white97z28]

Lol, let me know when you find these parts!

I know for sure there is one passenger door in a 97 v6 car at saginaw auto recyclers in saginaw mi...i bought the dash out of it...and the drivers door was already gone...and a few months ago rpm in flint had 3 cars a 95 v6 car with both doors and dirty door pannels, a 94 v6 car with dirty door pannels, and a 97 v6 car with only a passenger door my friend bought the interior out of that car and has one door pannel with a hole in it for the crank windows. So i know for sure i can get you the passenger side...but i will be going back to these junk yards as soon as the temp gets a little better probaly within the next 2 weeks.

[JoeliusZ28]

Well, Ive already passed up on some with dirty door panels... Id like to find some that are on part with the current condition of my interior if possible.

[1bad83ta]

Cages can always be cut out

Yeah but the cost is also a factor here. I talked to my brother and we are going to make our own harness bar. There can't be more than $40 in material for one of those.

[JoeliusZ28]

Yea im just giving you a hard time I might try fabbing a harness bar up as well. I have one out of a civic to start with, maybe it will be easy enough to modify.

[1bad83ta]

Here is a quick clip of the exhaust that I am going to be ditching soon incase anyone was interested.

[white97z28]

Well, Ive already passed up on some with dirty door panels... Id like to find some that are on part with the current condition of my interior if possible.

I will keep an eye out for sure...why don't you just cut a hole in your current ones?

[JoeliusZ28]

I will keep an eye out for sure...why don't you just cut a hole in your current ones?

Honestly Ive not yet seen a set up close in person, is that the difference is?

Here is a quick clip of the exhaust that I am going to be ditching soon incase anyone was interested.

AMERICA!

that exhaust sounds pretty good! I didnt know you had a cam in that thing!

[1bad83ta]

Honestly Ive not yet seen a set up close in person, is that the difference is?



AMERICA!

that exhaust sounds pretty good! I didnt know you had a cam in that thing!

yes sir!