[Project] project xfi cam swap 95 camaro

[95camaroLTX]

088..JPG090..JPG080..JPG
XFI 292 cam stock heads upgraded fuel pump and injectors plus some bbk headers block is .30 over bored anybody know what this should do power wise and some times maybe

[prorac1]

Id guess 330-340 hp with a proper tune on a stock short block. Times? need more information, auto, 6 speed, stall, gear, weight, headers, exhaust, compression, etc. Eric L

[meissen]

Is the XFI 292 cam a pretty aggressive cam? I'm surprised you're doing it with stock heads.

[95camaroLTX]

yes i drove the car the other day and it has awsome lower end and top end but the car is not even tuned yet so i cant really drive it till i get that done iam getting the car dyno tuned within the next month hopefully but i still need to get a stall and a gear those are both stock right now the trans is new fresh built auto 4l60e and i want to throw some afr heads on it next year to really open her up lol

[meissen]

Haha that's awesome man! Where about's in Macomb are you located, I can't believe I haven't seen your car on the road by now. And where are you going for the dyno tune?

[95camaroLTX]

iam taking the car to vector to get it tuned on the dyno and i live at 21 and hayes

[kyleozzie]

i love cammed lt1s!!

[95camaroLTX]

lol yea they do sound the best lol but do u know anything about the xfi cam

[ThreeHonks]

yeah XFI are good lobes, one of the most aggressive out there.

That cam is way too big without heads, your usable powerband is not going to be very good. Its not gonna help your DCR much either :/

[95camaroLTX]

do u know what kind of power i should put or some track times on stock suspention stock heads,bbk headers,injectors,fuel pump, roller rockers, valve springs ,the lower end has 4000 miles on it bored .30 over to 355 full roller motor but my deal is i want to do some heads and intake with a 150 shot but its only a 2 bolt main i dont know if it would handle it or not sorry i talk alot i just love lt1 lol and it also has ,built trans but dont have stall yet or gear lol i know iam stupid lol

[ThreeHonks]

do u know what kind of power i should put or some track times on stock suspention stock heads,bbk headers,injectors,fuel pump, roller rockers, valve springs ,the lower end has 4000 miles on it bored .30 over to 355 full roller motor but my deal is i want to do some heads and intake with a 150 shot but its only a 2 bolt main i dont know if it would handle it or not sorry i talk alot i just love lt1 lol and it also has ,built trans but dont have stall yet or gear lol i know iam stupid lol

first off, you need to rev to about 7000rpm so you wont see slower track times. ditch the BBK's and get some long tubes. 355 will take Heads/Cam no problem without blinking

I would say a low 13 as it sits now if you have traction

[meissen]

Steve @ Vector will do you right - he's our site sponsor with his side business, SB Tuning. Steve's username on here is BLK HAWK.

[MunsterZ28]

did you buy your car off a kid named justin?

[95camaroLTX]

nope i have know the car since day 1