Tweet
well i figured instead of making a billion threads on all the parts and shit ive done to my car i suppose ill make one of these since my original thread i deleted since i changed the whole plan up. so me and liz came up with a new name for it so heres all the stuff thats getting done
drivetrain modifications
- Moser 9 inch axle and housings with a detroit tru-trac
- center section 3.70 gears all put together by my buddy dave
- Spohn LCA relocation brackets
Suspension/chassis
- new springs to lift the car back up a little to make way for the new exhaust
- custom torque arm built by the guy doing my 6 pt
- Custom bent 6 pt roll bar (being done bya guy accross the lake from me who builds them all the time)
-welding in my pohn Subframe connectors and tieing them into the roll bar for ultra stiffness.
- Spohn drag rear sway bar
Exhaust
- Dual three inch into Dynomax bullets with a h pipe
Wheels
- Summit pro stars with M/T et streets out back 275/50/15 and skinnys up front
Interior
- New summit race seats (thanks for the deal Pace)
- Simpson 5 pt race harnesses for both sides
- new carpet front and back
- Rear seat delete with dual nitrous bottles and bottle heater
- 1 10 inch alpine type x in custom box way down in the back well for that little extra sound.
alright now onto a few pictures start with the start of gathering parts
and some in progress pictures of either parts going in or coming out
rearend out
interior coming out
test fitting the new seat
and it now is back on the ground after a long month and a half on jack stands
ill get some pictures of the rear end under it once its over at the shop for the roll bar
drivetrain modifications
- Moser 9 inch axle and housings with a detroit tru-trac
- center section 3.70 gears all put together by my buddy dave
- Spohn LCA relocation brackets
Suspension/chassis
- new springs to lift the car back up a little to make way for the new exhaust
- custom torque arm built by the guy doing my 6 pt
- Custom bent 6 pt roll bar (being done bya guy accross the lake from me who builds them all the time)
-welding in my pohn Subframe connectors and tieing them into the roll bar for ultra stiffness.
- Spohn drag rear sway bar
Exhaust
- Dual three inch into Dynomax bullets with a h pipe
Wheels
- Summit pro stars with M/T et streets out back 275/50/15 and skinnys up front
Interior
- New summit race seats (thanks for the deal Pace)
- Simpson 5 pt race harnesses for both sides
- new carpet front and back
- Rear seat delete with dual nitrous bottles and bottle heater
- 1 10 inch alpine type x in custom box way down in the back well for that little extra sound.
alright now onto a few pictures start with the start of gathering parts
and some in progress pictures of either parts going in or coming out
rearend out
interior coming out
test fitting the new seat
and it now is back on the ground after a long month and a half on jack stands
ill get some pictures of the rear end under it once its over at the shop for the roll bar
Nothin Special about my ride.....Yet!
Comment