Announcement

Collapse
No announcement yet.

Vette Progress

Collapse
X
Collapse
Who has read this thread:
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #91
    Thanks! Well the damn tire just won't hold air so i cant drive it at all! What a bummer. Anyways.... the eBay guy contacted me and told me he was very sorry and gave me 2 options.... My full money back or another set of the same tires that he will guarantee. I dunno what to do, because these last ones were supposed to be just fine..... hmmm, maybe give him one more shot? Whatchya think?
    sigpic

    98' Trans Am - Huron Speed Turbo Car

    Comment


    • #92
      Originally posted by Superman09 View Post
      Thanks! Well the damn tire just won't hold air so i cant drive it at all! What a bummer. Anyways.... the eBay guy contacted me and told me he was very sorry and gave me 2 options.... My full money back or another set of the same tires that he will guarantee. I dunno what to do, because these last ones were supposed to be just fine..... hmmm, maybe give him one more shot? Whatchya think?
      i guess it couldnt hurt as long as he pays every dime of shipping.
      -Derek-
      1999 Pontiac Trans Am Ram Air- Lots of Boltons..

      Comment


      • #93
        Car's looking sweet dude!!
        sigpic
        U.S. Army 1983-2005
        11.20@122.37 1.51 60'

        Originally posted by WMCCjames

        "Plans Subject to change upon Sobering up"

        Comment


        • #94
          Originally posted by redfbird99 View Post
          i guess it couldnt hurt as long as he pays every dime of shipping.
          My thought exactly. And if these dont work out he will have to agree to give me a refund.....
          sigpic

          98' Trans Am - Huron Speed Turbo Car

          Comment


          • #95
            I'd say give him another try, as long as he has really good feedback.

            Comment


            • #96
              Originally posted by OIF1VET View Post
              Car's looking sweet dude!!
              Thanks! Once i get some new tires on the rear i am taking it back to my friends with the lift and the lowering kit is going on, should make it look nasty
              sigpic

              98' Trans Am - Huron Speed Turbo Car

              Comment


              • #97
                sounds like the guy might be sincere Jonny, I would give him one last shot too..
                99 Buick Regal GS- New DD

                SOLD-1983 Firebird-305-2.5 inch custom bent exhaust w/ dynomax muffler-2004r-87 TA 3.08 posi-90 Camaro brakes-91-92 Hatch-87 TA bumpers and GFX-89 TA Tailights-87 TA front fenders-16 inch GTA wheels
                SOLD-1967 Buick Skylark

                Originally posted by ThreeHonks
                I like having a loud car, every time the neighbors dog barks, I just go let my car sit and idle in the driveway

                Comment


                • #98
                  Originally posted by cobalt camaro View Post
                  Daytona: They match the price of the tire, but they will ask you if that price includes mounting balancing, and road hazzard waranty. When i was looking for tires for my new rims i tried that and in the end it saved me like 10 bucks total. Your better off getting a price from belle tire, and then taking it over to discount and have them beat it. When i tried to compare with tire rack they asked what tires i wanted, but then they call tire rack and see what price they offer and what it would be with road hazzard. I ended up going with discount because they gave me a good deal and the one in Saginaw has always done a good job with everything i've taken them.

                  Jonny, the car looks bad ass. Hope you get everything straightened around with that guy on Ebay.


                  Dunno...saved me $62 a tire...instead of $168 a tire, I got them this spring for $106...probably depends on what tire you're getting...
                  Originally posted by Redd8407
                  I WANT NOISE! SPEED! AN ENGINE THAT SHAKES MY INTERNAL ORGANS LIKE THEY GOT PARKINSON'S! I DONT WANT AN ENGINE THAT IS PARTIALLY POWERED BY MY LAPTOP BATTERY!
                  Originally posted by Z28ISGR8
                  WHY THE F*CK IS THERE A GOAT ON A FERRARI?
                  Originally posted by Darren
                  I think it is because I take it in and out all the time, the rubber has just stretched out, especially at the bottom where it is really thin. It annoys me more then anything.

                  Comment


                  • #99
                    Delete the molding ASAP!


                    Comment


                    • Originally posted by c0ncEpT View Post
                      Delete the molding ASAP!
                      I tried the other day, busted out the hairdryer and fishing line and had no luck. The molding is so think its hard to get enough heat to it. I will work on it more one day when i'm bored. I need to get this tire situation figured out ASAP becuz i cannot drive the car now. I'm giving the guy until tomorrow to give me an answer to make my decision. Either i will give him another shot and wait to see if the new tires work, or i'll get my money back and order new nitto invo's from Discount and drop trow and grab my ankles.
                      sigpic

                      98' Trans Am - Huron Speed Turbo Car

                      Comment


                      • pricey eh?
                        2011 Ford Raptor SuperCrew
                        SVT Beadlock Wheels
                        Roush Intake, Corsa Exhaust
                        20" and 40" Light Bars

                        2000 Camaro Z28
                        Stripped Down Drag Car Build

                        Project 1999 Camaro Z28


                        2009 G8 GT Stryker Blue Metallic-SHEGONE
                        Crate LS3, LS9 Cam, LSA Supercharger, Metco Solid Isolator
                        RotoFab Intake, HSRK, Camaro Trans Pan
                        ZL1 HX, ZL1 Fuel Pump, CTS-V Lid, LSA Injectors
                        Pat G - 93 Octane Tune
                        Kooks 1-7/8" Longtubes, High Flow Cats, X Pipe, Solo AxleBacks
                        CTS-V Calipers, Brembo Pads
                        H&R Lowering Springs, Whiteline Bushings, FE3 Struts/Shocks, Camaro 20" Wheels
                        HIDs, LED Conversion, Atari Gauges, Tint, Roof Carbon Fiber Wrapped, Innovative Wideband

                        2.55 Lingenfelter Pulley and Injectors waiting to go on!
                        sigpic

                        Comment


                        • Originally posted by s.reef View Post
                          pricey eh?
                          Anything for a 19 inch rim is going to be expensive. Even off brand shit.


                          Comment


                          • Originally posted by c0ncEpT View Post
                            Anything for a 19 inch rim is going to be expensive. Even off brand shit.
                            Even 18s thats why i went with 17s
                            2011 Ford Raptor SuperCrew
                            SVT Beadlock Wheels
                            Roush Intake, Corsa Exhaust
                            20" and 40" Light Bars

                            2000 Camaro Z28
                            Stripped Down Drag Car Build

                            Project 1999 Camaro Z28


                            2009 G8 GT Stryker Blue Metallic-SHEGONE
                            Crate LS3, LS9 Cam, LSA Supercharger, Metco Solid Isolator
                            RotoFab Intake, HSRK, Camaro Trans Pan
                            ZL1 HX, ZL1 Fuel Pump, CTS-V Lid, LSA Injectors
                            Pat G - 93 Octane Tune
                            Kooks 1-7/8" Longtubes, High Flow Cats, X Pipe, Solo AxleBacks
                            CTS-V Calipers, Brembo Pads
                            H&R Lowering Springs, Whiteline Bushings, FE3 Struts/Shocks, Camaro 20" Wheels
                            HIDs, LED Conversion, Atari Gauges, Tint, Roof Carbon Fiber Wrapped, Innovative Wideband

                            2.55 Lingenfelter Pulley and Injectors waiting to go on!
                            sigpic

                            Comment


                            • Originally posted by Superman09 View Post
                              I tried the other day, busted out the hairdryer and fishing line and had no luck. The molding is so think its hard to get enough heat to it. I will work on it more one day when i'm bored. I need to get this tire situation figured out ASAP becuz i cannot drive the car now. I'm giving the guy until tomorrow to give me an answer to make my decision. Either i will give him another shot and wait to see if the new tires work, or i'll get my money back and order new nitto invo's from Discount and drop trow and grab my ankles.
                              lubricate the fishing line with goo gone. (just dump it on the molding) it helps a LOT.
                              -Joel
                              1995 Z28 M6 - AI226/234 - autocross ricer
                              1984 Scottsdale K10 - 305/4bbl/4spd


                              WTB List:Midwest Chasis DS Loop

                              Comment


                              • Originally posted by s.reef View Post
                                Even 18s thats why i went with 17s
                                17's on the rear of a vette would prolly screw up the traction control setting ive seen it happend

                                plus 17's on a vette? gotta go big like tru ballerz
                                sigpic
                                The LS1 or Go Home Crew

                                ASE master certified
                                1998 Camarbo z28-going back to stock
                                11.3@121 old heads & cam setup




                                Comment

                                Working...
                                X