Nitrous plate suggestions needed

[kammi10]

the dirty bay was sleeper lol nothing about it will be once those noids and lines are run I'm not hiding anything.

going to spray 100 at first then work my way up to 150 like everybody else. Lots of learning to do still thats for sure. Larry will be my new mentor lol. Guys are shooting over 200 through this plate and making it work although I'm sure the distribution isn't great and I'm not that brave.

bullshit.. were putting the 250 pills in right from the get go..

[Detoxx03]

I started @ 150 and that only lasted a week before I moved up lol

[DETROITMUSCLE]

I started @ 150 and that only lasted a week before I moved up lol

whatever it takes to run the number I want. not going to be easy thats for sure.

[Detoxx03]

I'm not sure what number you want but the want I want is very achievable if I can get it to hook

[1BADAIR]

hsw only rates it to 175 i think
if you happen to get your injectors flowed go ahead and stick the to biggest in 7 and 8

[DETROITMUSCLE]

I know they don't recommend more than 175 but I wouldn't be the first. I'll give my injectors back to Phil and have them labeled. I think we did that last time though and they should be back there already. Its not going to be easy and I'm sure things will break in the process but I'd like to run 9s on a shot.

[OIF1VET]

Where can I get my injectors flow tested at and about what does it run?

[1BADAIR]

livernois does it.
smc also

[squareandcompass]

http://www.cruzinperformance.com/ Larry, check this Cat out. He's outta Big Rapids. I have read a lot of good stuff about him. Rich, if I remember correctly is his name.

Where can I get my injectors flow tested at and about what does it run?

[DETROITMUSCLE]

Anyone have a ls1 style coolant crossover lying around?

[1BADAIR]

gonna cut your intake?

[DETROITMUSCLE]

Yep grinding it shouldn't be too bad. Cheaper than the Kurt Urban setup.

[1BADAIR]

lol.. i cut the intake on that pewter car i did. their dad stopped by and gave me money for an ls6 without them knowing. didnt want to add more cost for the tubes so i cut it. makes a mess

[DETROITMUSCLE]

I can imagine, what did you use to grind the ribs off?

[1BADAIR]

Started with a grinder and cookies. Switched to a cut off then smoothed with cookies. Much faster