TDs out the back project.

[jderry]

I either plan on making the ones I have now exit over out the back, or selling them and making a new set out of the back.

The loud factor is not what bothers me anymore, just the drone. So anyways to lower that might help too.


Any help, ideas, advice is welcome. Here's what I am working with




DSCN0205.JPGDSCN0202 (640x480).jpg

[JoeliusZ28]

It can be done.

http://www.camaroz28.com/forums/exha...-sides-452678/

[jetice]

I have been thinking of doing this for a little while now, but don't really have the time to do it. The way I have thought about doing it is to make a panhard support rod from scratch so the drivers side would clear. It would look something like this
Panhard Support1.JPG

[birdie2000]

I have been thinking of doing this for a little while now, but don't really have the time to do it. The way I have thought about doing it is to make a panhard support rod from scratch so the drivers side would clear. It would look something like this

I've actually had that exact same idea. I almost wonder if you could use just one piece with thick tubing and sharp bends without having to have it braced like that. From everything I've heard, it's just that... a support, not an actual suspension piece. A lot of guys remove them entirely if they're mainly drag-oriented setups.

[jderry]

I've got the relocation one on just for the hell of it. I'd love to have an over the axle system. With what I have now, not sure what would be easiest.

[Nocooler]

The true dual thread on tech has a lot of pictures - if you go 2.5 over should be easy, or you could always go under - but I think that looks cheesy