Tweet
I just got my SLP Lid today and im very confused to were that hose goes to? does it just sit there? or am i not supposed to hook it up at all, help would be great!!!!
-
-
Probably attaches to the O2 Sensor. -
it really boggles me where it goes to, the instructions say nothing! every othe slp lid i have seen on other peoples cars have no tube coming out of them???Comment
-
uh there are no 02 sensors except in exhaust.Originally posted by pheonix_rising
------------------------------------------
2004 GMC Envoy - Tuned, Airraid Intake, rest stock
2005 Malibu - Stock, anyone have a ecotec factory gm supercharger for me? lol
5th gen Camaro V6 Forums
http://www.bowtiev6.comComment
-
Throttlebody bypass?
SpeedDetroit Speedshop <Owner> Detroit's Only True Grassroots Speedshop
http://gasfed.blogspot.com/
Originally posted by KuruptWS6spdComment
-
it's for the EGR, or AIR,
right below on the right you should see where another hose that looks like that one coming from it
hard to explain. I'll take pictures if i can in time!Last edited by BlackbirdWs6zzz; May 24th, 2006, 03:58 PM.Comment
-
Aha Thats the name of it!!! I keep getting those two mixed up. Follow the intake back to the manifold and you'll see it should be on the left side. look for Wires running into the intake tubing.Originally posted by BlackbirdWs6zzzComment
-
I'm pretty sure it's the right side if it's LS1Comment
-
If its a 98 or 99, you will not have anything to connect that hose to. I believe that is a modification that was made on the LS1 in 00'.
"ANY car can be an SS but ONLY a Camaro can be a Z28!" Scott S.
"Owning a 9 second import is like coming out of the closet. At first you surprise everyone, but in the end you're still gay!"Comment
-
Nick's 94 3.8 Has one and so does my 97 3.8Comment
-
Nope.. there is a difference between 98,99 and possibly early 00' LS1 intake covers and late 00-02 LS1 covers...
98-99 possibly 00
00-02
Last edited by 02redz28; May 24th, 2006, 04:48 PM.
"ANY car can be an SS but ONLY a Camaro can be a Z28!" Scott S.
"Owning a 9 second import is like coming out of the closet. At first you surprise everyone, but in the end you're still gay!"Comment
-
That is for the AIR system. I would just take the hose off and plug the hole with a stopper you should be able to get at home depot or whatever. Just make sure your AIR system already has a filter on it.Comment
-
yea thats what im going to do, plug it, thanks guys!!!Comment
-
Here's a picture of my lid on a '02. The small hose does go to the air pump. On early LS1's, just plug the hole in the lid.
Comment
-
That is true, you ordered the 00 and up lid. Its no biggy you just need to block off the hole and your set, dont worry about that tube.
Originally posted by 02redz281999 Pewter TransAm
<PaceSetter LTs, Lingenfelter LS6 Intake Manifold, and one little secret...
>
"Spray and Pray"
Comment
Comment