Announcement

Collapse
No announcement yet.

removed my 93 lt1 fuel rails to polish now wont start?

Collapse
X
Collapse
Who has read this thread:
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • removed my 93 lt1 fuel rails to polish now wont start?

    I removed my 93 camaros fuel rails lastnight to polish them.

    Well i put everything back together and it wont start now.

    Does anyone have a clue where these injector wires go?

    I know its batch fire but id figure it would matter about where the wires are
    To start just like the 94+

    Im kinda screwed here guys. Need help asap. Pm me if you post

    I am getting spark. I checked by removing the coil wire
    Off the coil it was sparking orange and blue. Ill let the car sit
    For awhile then go back out and try again

  • #2
    Originally posted by murderedzsnutz View Post
    I removed my 93 camaros fuel rails lastnight to polish them.

    Well i put everything back together and it wont start now.

    Does anyone have a clue where these injector wires go?

    I know its batch fire but id figure it would matter about where the wires are
    To start just like the 94+

    Im kinda screwed here guys. Need help asap. Pm me if you post

    I am getting spark. I checked by removing the coil wire
    Off the coil it was sparking orange and blue. Ill let the car sit
    For awhile then go back out and try again
    Just about impossible to help you. I could take pics, but I labeled all of mine before I removed the fuel rails, because they all look the same. . .
    Nick H.
    Current MIFC Vice President

    sigpic

    Comment


    • #3
      Your injector wires have a number on them that corresponds to the injector that goes to the related cylinder. I would make sure you have those plugged in the right spot.
      sigpic

      355 LT1 M6. 232/240 LE cam. 21* Trick Flow heads. Fully ported intake. 58mm TPIS tb. 42# SVO Injectors. LS7 Lifters. Moser 9" TrueTrac w/ 4.22 gears. True Duals. UMI Suspension. LS1 brake swap. Dr. Phil tuned 400ish rwhp. Money Pit.

      Comment


      • #4
        D Fixed it. Come to find out i had a rusty corroded coil to opti
        Wire and it wouldnt give the plugs spark. Pulled it off scraped
        Alittle of it out. And it started. So ill have to buy one on Fri

        Comment


        • #5
          [MENTION=2894]ryanwarby01[/MENTION] not for us 93 owners our cars are batch
          Fire so it doesnt mater what injector wire goes where as
          Long as its in the same pair on the same side of the engine.

          In away were lucky. But now that i know ill keep it in mind for next
          Time lol

          Thanks for the help

          Comment


          • #6
            reply

            [MENTION=386]93formulalt1[/MENTION] thanks you always give good help when needed.
            Im going to label mine too. But a simple coil wire did the trick.

            If it wasnt for stupid little things or mods on my car i would be bored lol

            Comment


            • #7
              Originally posted by murderedzsnutz View Post
              @93formulalt1 thanks you always give good help when needed.
              Im going to label mine too. But a simple coil wire did the trick.

              If it wasnt for stupid little things or mods on my car i would be bored lol
              I hear ya there, if it weren't for all the little mistakes I've made on my cars in the past, I'd have absolutely no clue what I'm talking about now. lol Glad you got it all figured out!
              Nick H.
              Current MIFC Vice President

              sigpic

              Comment

              Working...
              X