Wiring in a window switch....

[PewterTA]

okay, didnt know if I should put this in Nitrous or the electrical category but I figured someone would move it if it was in the wrong one.

Anyways, Im wiring in a MSD Ignition Digital RPM Window Switch. It tells me to connect the White wire from the window switch(supposed to control RPMs) to the white wire of PIN10 from the computer... Anyone know where I can get a diagram of a 1999 TransAm computer so I can get an Idea of what PIN10 is? I tried searching on google and looking in my book but nothing... Also if someone has another way to do it that would be cool too. Thanks!

[1BADAIR]

bottom connector on the pcm.
remove the gray cover aand they should be numbered on each end
I believe its the 10 wire to the right in the bottom row

[Schuby87]

Check here, there is a lot of info on this site.

http://performanceworks1.com/technical_aides.htm

[97rs4life]

yea pop the grey cover off like larry said. Numbers are stamped right on pcm

[meissen]

Not sure if this helps too, but here's shbox.com's diagrams -- very useful site.http://shbox.com/1/schematics_wiring.html

[PewterTA]

Thanks so much!