Welcome to the Michigan FBody Association website.
The Michigan FBody Association is a centralized website for FBody enthusiasts to discuss what's going on in the Michigan area. MiFbody.com was created to allow for an easy one-stop place to find out what's going on in Michigan as far as FBody events, to find out what clubs are available in your immediate area, and for an easy place to post classifieds for items you want to sell! Our goal was to create a more close-knit community of FBody enthusiasts in the state of Michigan, and to bring Camaro and Firebird enthusiasts alike together for some amazing FBody events!
The most important thing to know about the Michigan FBody Association is that we are NOT a club! The Michigan FBody Association is open to everyone, and is a community. Thus, we will have get togethers, casual cruises, events, and such like that, but this is not an exclusive club and it's 100% free to join this site! So what are you waiting for? Register now!
If you have any problems with the registration process or your account login, please contact us!
Replacing my stock Front signal lenses with clears .
Question ????... What is the EASYEST way to remove
the friggin screws ??? without taking all the flip-up head light off ...
Any info welcomed !
Replacing my stock Front signal lenses with clears .
Question ????... What is the EASYEST way to remove
the friggin screws ??? without taking all the flip-up head light off ...
Any info welcomed !
Can't help ya..... My gf's came with smoked corners and my fronts are held in by one screw from the outside.
1999 Pontiac Trans Am- LS1 - M6 - ITSSLOW - 12.998@109.59 - SOLD
1994 Chevrolet Camaro - 3.4L - M5 - ITSSLWR - 16.558@85.38 2003 Chevrolet Blazer
There should be an access panel under the bumper that you take two 10mm bolts out and pull it down. It's still a pain in the butt to reach in there and get to the screws.
_____________________________________________
Wade 2002 Camaro SS T Top Black M6 SLP 345HP 1985 Camaro IROC Z28 T Top Silver 305TPI Auto
2003 S10 Blazer 2 door 2wd 4.3 auto lowered 3" daily driver
There should be an access panel under the bumper that you take two 10mm bolts out and pull it down. It's still a pain in the butt to reach in there and get to the screws.
I really could not get any real good shots. I found some shots of the same parts on Hugger Z's turbo install thread.
The black panels on both sides attached to the front and outside curve of the bumper. These same side panels that will need to be removed are also held up by the main air deflector, that deflects the air flow up into our radiators, with two blots on each side.
Once those panels are removed you will have easy access to the Front Signal and Side Marker lights.
It's only 2 bolts for the access panel. You don't remove the entire panel. Yes it's a pain to reach up through there!
_____________________________________________
Wade 2002 Camaro SS T Top Black M6 SLP 345HP 1985 Camaro IROC Z28 T Top Silver 305TPI Auto
2003 S10 Blazer 2 door 2wd 4.3 auto lowered 3" daily driver
the way i put my clears on was i took that plastic off of the headlight and squeezed my arm down there still a pain though.
sigpic Im Gonna Party Like A Rock Star, Hit A Bunch Of Strip Bars, Wake Up Naked In A Hotel Room, Through My TV Out The Window, Smoke A Bunch Endo Cause Tonight Im Wanted Dead Or Alive
It sure in the HELL is !!! Got the bolts out,man ....,NO room ,
**** it !!!! I give up for tonite ....Grrrrrrrrrrrrrrrr
Got one side Done !!!!! I'll tell you what ,tho ....I took ALL the screws..
out & remove the WHOLE panel !! 100% easyier that way .Plenty of room to see & work ....
Tweet
Comment