Wont start

[Phantom409]

What the heck!!!
I put my car up on ramps to do some more rearend work.
I was down for a week, thats it.
Car ran just fine, started like a champ
Now that I'm done it won't start

I have a MSD 6AL and I have pwr to the system 12.61 volts.
I have no spark at the coil.
Or any where else for that mater.

Did my coil take a puke??
Or did my opti puke?

[Phantom409]

Picking up a new MSD coil today

[MiT/A'96]

What the heck!!!
I put my car up on ramps to do some more rearend work.
I was down for a week, thats it.
Car ran just fine, started like a champ
Now that I'm done it won't start

I have a MSD 6AL and I have pwr to the system 12.61 volts.
I have no spark at the coil.
Or any where else for that mater.

Did my coil take a puke??
Or did my opti puke?

Sure hope it wasn't your opti !!!!!

[Phantom409]

I have a few of those around
Parts mostly but I can make a new one from what I have.

I don't have spark at the coil so I'm going that route

[BP_Z28]

could be the problem..gotta love spending money on parts then find out it wasnt that part eh..

[Orange Terror]

How old is the coil?

[Phantom409]

About 3yrs.

[Orange Terror]

Seems weird that it would have went out but who knows. Goodluck, I'd probably start with the coil to then.

[WMCC Gary]

Have you checked to see if you have power to the coil?

[1bad83ta]

Yeah I would check power to the coil before buying another one.

[SlipStreamZ28]

kinda random but it could be the oil sending unit. mine just went bad a lil while ago

[Phantom409]

I think it's the ICM!
I have 11.87 volts to it but no spark
My truck did this to me before I sold it, should have known.

[Phantom409]

Well I hooked up my Accel 300 + and I got nothing
Any one good at searching this stuff out