Well , some progress today! Pulled the front of the motor apart. Removed the opti. Took it up to Advanced and tore it down, the guy there knows his opti's. But it didnt take a genius to see where the problem was here.

Remember kids ALWAYS use locktite on the rotor screws!!!
heres the cap

The white dust is from the rotor, it was being ground away. I didnt think the opti should rattle when shaken.
So even though it is probably repairable I have decided to replace it with a Delphi unit. Along with the water pump, the weep hole is discolored so I am not taking any chances. Since Im in this far, Im going to do a new set of lifters, then well see where we go from here.

Remember kids ALWAYS use locktite on the rotor screws!!!
heres the cap

The white dust is from the rotor, it was being ground away. I didnt think the opti should rattle when shaken.
So even though it is probably repairable I have decided to replace it with a Delphi unit. Along with the water pump, the weep hole is discolored so I am not taking any chances. Since Im in this far, Im going to do a new set of lifters, then well see where we go from here.
so Now I have a spare.
Comment