Tweet
So....what would you do?????
Sent from my DROID RAZR using Tapatalk 2
Sent from my DROID RAZR using Tapatalk 2
-
96 BBB Impala SS-Fixed, Broke, Fixed again
95 DCM Caprice Wagon-STRKDIT
93 Caprice Classic- Whore -
Head problem
They make threaded replacement studs, but you will want to take it off and take it to a machine shop to tap it. -
They look like press in studs correct?
You can convert to screw in studs. You have to mill the stud base down, so that fixes your problem, to use screw in studs then tap the hole to the threads.Originally posted by Yoshi94sigpicOriginally posted by ryanwarby01Comment
-
Re: Head problem
Yep pressed in. I already jumped for another head. Plan to keep this and get one more and have ported and built up for a future build for my dad
Sent from my DROID RAZR using Tapatalk 296 BBB Impala SS-Fixed, Broke, Fixed again
95 DCM Caprice Wagon-STRKDIT
93 Caprice Classic- WhoreComment
-
Well then what I posted above should work.
http://books.google.com/books?id=g46... heads&f=false
Mill the stud boss down so its just higher then the bottom part of the stud. Then tap the hole.Last edited by Fox Slaughter; March 2nd, 2013, 08:12 PM.Originally posted by Yoshi94sigpicOriginally posted by ryanwarby01Comment
-
Head problem
You don't necessarily need to mill it down. They make studs that don't have a hex on them. They look just like the pressed in ones, except the have threads on the bottom. I put them in all the timeComment
Comment