For those of us who live in the country this is always a problem in the winter. How do you keep mice away from your car? What are some methods you guys have found to work? I have thought about putting the car up on Jack stands and putting the jackstands in some kind of pan with RV antifreeze so that the little bastards cant climb the jack stands. Thanks Eric L
Announcement
Collapse
No announcement yet.
Keeping mice away from your car in the winter, in the country?
Collapse
X
-
Keeping mice away from your car in the winter, in the country?

1997 Camaro SS #2819 M6, Red, 3.42, 1 of 27, Ttops, BBK shorty headers, Flowmaster cat back, 1.6 rr, LT4 valve springs, ASAM CAI, Centerforce clutch, runs 12s, breaks 10 bolts.
http://s602.photobucket.com/albums/t...20Camaro%20SS/

1963 Plymouth Valiant Signet 200, 6.0 LS3, Carb, Rapid Motorsports Dominator 2X cam.
http://s602.photobucket.com/albums/t...uth%20Valiant/ -
InActive Member
- August 29th, 2006
- 1456
- Josh C.
- 1997 Z28
- Fraser, MI
- Electro-Mechanical Engineer
- Send PM
I think all that would do is make your car full of wet dead mice, not a bad idea though, maybe a sticky substance instead, like fly paper? Knew a guy that made setup with a battery( not sure what type, car I think) and a plate so that when the mouse was half on and half off the plate the mouse became the ground for the circuit. Again the problem is that you now have the potential to have a small scurrying FLAMING object running around underneath your carThe Chevy Camaro was built with a single purpose in mind which it executes flawlessly...Going very very fast in a straight line until your hair catches on fire.
-
Thanks for the ideas guys. I have also heard of bounce dryer sheets, and irish spring soap. Ive used bounce sheets before, they work 90 percent of the time, the other 10 percent pooped on the dryer sheet, lol, letting me know that it wasnt working........................................... ...smart little bastards.......................................... .........I POOP ON YOUR BOUNCE SHEET, lol. That was my fear about the antifreeze in the pan, what could I put in the pan that would kill them instantly? Cause ive used stickey pads, and they work kinda as well. My mice poop on the things that dont work..........................I think its theyre way of telling me.................fail, try again, lol. Eric L
1997 Camaro SS #2819 M6, Red, 3.42, 1 of 27, Ttops, BBK shorty headers, Flowmaster cat back, 1.6 rr, LT4 valve springs, ASAM CAI, Centerforce clutch, runs 12s, breaks 10 bolts.
http://s602.photobucket.com/albums/t...20Camaro%20SS/

1963 Plymouth Valiant Signet 200, 6.0 LS3, Carb, Rapid Motorsports Dominator 2X cam.
http://s602.photobucket.com/albums/t...uth%20Valiant/
Comment
-
My son is allergic to cats, lol.
1997 Camaro SS #2819 M6, Red, 3.42, 1 of 27, Ttops, BBK shorty headers, Flowmaster cat back, 1.6 rr, LT4 valve springs, ASAM CAI, Centerforce clutch, runs 12s, breaks 10 bolts.
http://s602.photobucket.com/albums/t...20Camaro%20SS/

1963 Plymouth Valiant Signet 200, 6.0 LS3, Carb, Rapid Motorsports Dominator 2X cam.
http://s602.photobucket.com/albums/t...uth%20Valiant/
Comment
-
I used to use irish spring but still always seemed to find dropping teeth marks where the little bastards where eating the soap. For the last 2 years I've used peppermint potpourri made by a local lady and have not found any signs of mice in the car since then. I use to bags of it one inside the car and one under the hood. I just dump them in pie tins and sit them in the car. Pretty easy and very effective from what I seen. She seels the bags for I beleive $6 each. I can pick them up and ship them for a few bucks more if anybody is interested.Western Michigan Camaro Club ~ President
1987 Camaro IROC-Z Pearl White & Black w/ Red Pearl, 355 TPI, A4, 3:42, AirRide,"GOMARO"2017 Silverado Double Cab Z71 Pepperdust Metallic, 5.3, A6, 3:42, "SASYZ71"WMCC Website www.wmcamaro.org
2005 Pontiac Grand Prix GT White, 3800
"A government big enough to give you everything you want,
is strong enough to take everything you have." — Thomas Jefferson
"Democracy will cease to exist when you take away from those who
are willing to work and give to those who would not." — Thomas Jefferson

Comment
-
Than they will just go inside the car to get away from the traps, lol. I got my hands on some sheet metal industrial light fixture cans that are 10 inches tall. Im going to put 3 inches of antifreeze in each one, put the jack stands inside them, and grease the cans and stands with cooking spray. That way, they climb in, and cant climb out, and if they do, they die.................fast. Plus traps, bounce sheets, peperment extract, and irish spring. I may not get rid of the mice, but ill smell good and be all oiled up come spring, lol. Eric L
1997 Camaro SS #2819 M6, Red, 3.42, 1 of 27, Ttops, BBK shorty headers, Flowmaster cat back, 1.6 rr, LT4 valve springs, ASAM CAI, Centerforce clutch, runs 12s, breaks 10 bolts.
http://s602.photobucket.com/albums/t...20Camaro%20SS/

1963 Plymouth Valiant Signet 200, 6.0 LS3, Carb, Rapid Motorsports Dominator 2X cam.
http://s602.photobucket.com/albums/t...uth%20Valiant/
Comment
-
InActive Member
- August 29th, 2006
- 1456
- Josh C.
- 1997 Z28
- Fraser, MI
- Electro-Mechanical Engineer
- Send PM
Make sure its a pretty good distance from the edge of the can to the jackstand, you'd be surprised how far those little bastards can jumpThe Chevy Camaro was built with a single purpose in mind which it executes flawlessly...Going very very fast in a straight line until your hair catches on fire.
Comment
-
Yeah, im hoping the cooking oil will make it slippery enough to keep them ALL from climbing up. Anybody have any tips as to a slippery (re: real slippery) substance i can put on them. OK, I know, that dosent sound good, you know what i mean here, lol, keep it clean smart asses, lol. Eric L
1997 Camaro SS #2819 M6, Red, 3.42, 1 of 27, Ttops, BBK shorty headers, Flowmaster cat back, 1.6 rr, LT4 valve springs, ASAM CAI, Centerforce clutch, runs 12s, breaks 10 bolts.
http://s602.photobucket.com/albums/t...20Camaro%20SS/

1963 Plymouth Valiant Signet 200, 6.0 LS3, Carb, Rapid Motorsports Dominator 2X cam.
http://s602.photobucket.com/albums/t...uth%20Valiant/
Comment
-
InActive Member
- August 29th, 2006
- 1456
- Josh C.
- 1997 Z28
- Fraser, MI
- Electro-Mechanical Engineer
- Send PM
I alway remembered floor stripper being slippery as all hell but I dont know how long it would last before it would evaporate. I think axle grease might be your best betThe Chevy Camaro was built with a single purpose in mind which it executes flawlessly...Going very very fast in a straight line until your hair catches on fire.
Comment
-
My father in law was an old farmer Larry, lol. He told me that same thing years ago, lol. Ive always heard it works well. If I have room under the car I would like to try that this year. Eric L
1997 Camaro SS #2819 M6, Red, 3.42, 1 of 27, Ttops, BBK shorty headers, Flowmaster cat back, 1.6 rr, LT4 valve springs, ASAM CAI, Centerforce clutch, runs 12s, breaks 10 bolts.
http://s602.photobucket.com/albums/t...20Camaro%20SS/

1963 Plymouth Valiant Signet 200, 6.0 LS3, Carb, Rapid Motorsports Dominator 2X cam.
http://s602.photobucket.com/albums/t...uth%20Valiant/
Comment


Comment