Announcement

Collapse
No announcement yet.

idle rpm

Collapse
X
Collapse
Who has read this thread:
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • idle rpm

    just wondering what some of your guys' idle speeds are. trying to see if mine has a problem.
    1996 Trans Am WS6 - long term project



  • #2
    right around 1k if i recall
    /
    2011 Ford Raptor SuperCrew
    SVT Beadlock Wheels
    Roush Intake, Corsa Exhaust
    20" and 40" Light Bars

    2000 Camaro Z28
    Stripped Down Drag Car Build

    Project 1999 Camaro Z28


    2009 G8 GT Stryker Blue Metallic-SHEGONE
    Crate LS3, LS9 Cam, LSA Supercharger, Metco Solid Isolator
    RotoFab Intake, HSRK, Camaro Trans Pan
    ZL1 HX, ZL1 Fuel Pump, CTS-V Lid, LSA Injectors
    Pat G - 93 Octane Tune
    Kooks 1-7/8" Longtubes, High Flow Cats, X Pipe, Solo AxleBacks
    CTS-V Calipers, Brembo Pads
    H&R Lowering Springs, Whiteline Bushings, FE3 Struts/Shocks, Camaro 20" Wheels
    HIDs, LED Conversion, Atari Gauges, Tint, Roof Carbon Fiber Wrapped, Innovative Wideband

    2.55 Lingenfelter Pulley and Injectors waiting to go on!
    sigpic

    Comment


    • #3
      maybe a little less then that now that i really think about it lol
      2011 Ford Raptor SuperCrew
      SVT Beadlock Wheels
      Roush Intake, Corsa Exhaust
      20" and 40" Light Bars

      2000 Camaro Z28
      Stripped Down Drag Car Build

      Project 1999 Camaro Z28


      2009 G8 GT Stryker Blue Metallic-SHEGONE
      Crate LS3, LS9 Cam, LSA Supercharger, Metco Solid Isolator
      RotoFab Intake, HSRK, Camaro Trans Pan
      ZL1 HX, ZL1 Fuel Pump, CTS-V Lid, LSA Injectors
      Pat G - 93 Octane Tune
      Kooks 1-7/8" Longtubes, High Flow Cats, X Pipe, Solo AxleBacks
      CTS-V Calipers, Brembo Pads
      H&R Lowering Springs, Whiteline Bushings, FE3 Struts/Shocks, Camaro 20" Wheels
      HIDs, LED Conversion, Atari Gauges, Tint, Roof Carbon Fiber Wrapped, Innovative Wideband

      2.55 Lingenfelter Pulley and Injectors waiting to go on!
      sigpic

      Comment


      • #4
        the tach can be 200-400 rpm off so unless you have a scan tool or something its hard to tell

        Comment


        • #5
          Originally posted by 1BADAIR View Post
          the tach can be 200-400 rpm off so unless you have a scan tool or something its hard to tell
          very true...

          whats yours reading btw?
          2011 Ford Raptor SuperCrew
          SVT Beadlock Wheels
          Roush Intake, Corsa Exhaust
          20" and 40" Light Bars

          2000 Camaro Z28
          Stripped Down Drag Car Build

          Project 1999 Camaro Z28


          2009 G8 GT Stryker Blue Metallic-SHEGONE
          Crate LS3, LS9 Cam, LSA Supercharger, Metco Solid Isolator
          RotoFab Intake, HSRK, Camaro Trans Pan
          ZL1 HX, ZL1 Fuel Pump, CTS-V Lid, LSA Injectors
          Pat G - 93 Octane Tune
          Kooks 1-7/8" Longtubes, High Flow Cats, X Pipe, Solo AxleBacks
          CTS-V Calipers, Brembo Pads
          H&R Lowering Springs, Whiteline Bushings, FE3 Struts/Shocks, Camaro 20" Wheels
          HIDs, LED Conversion, Atari Gauges, Tint, Roof Carbon Fiber Wrapped, Innovative Wideband

          2.55 Lingenfelter Pulley and Injectors waiting to go on!
          sigpic

          Comment


          • #6
            mine always read 1k but it was about 750ish in reality
            sigpic
            Sold!
            www.fquick.com/lozanoa11
            94 Grand Cherokee (sold)
            95 Accord(for sale)
            99 Outback (snow destroyer)

            Comment


            • #7
              Originally posted by s.reef View Post
              very true...

              whats yours reading btw?
              under 80degree coolant temp(or A/c on) the idle is set to 1050 tach says 1200 I think
              normal is 950 tach says 800 I think.
              shift at 6800 and I think the tach says 5000

              Comment


              • #8
                I idle at 600-650 RPM

                Comment


                • #9
                  my digital tach says 850 at idle..
                  sigpic
                  U.S. Army 1983-2005
                  11.20@122.37 1.51 60'

                  Originally posted by WMCCjames

                  "Plans Subject to change upon Sobering up"

                  Comment


                  • #10
                    got a scanner, ant it varies between 749-753rpm. that seems a little high to me. most of the lt1 videos i see they idle between 550-700rpm depending on the build setup.
                    1996 Trans Am WS6 - long term project


                    Comment


                    • #11
                      mine is about 825

                      Comment

                      Working...
                      X