Welcome to the Michigan FBody Association website.
The Michigan FBody Association is a centralized website for FBody enthusiasts to discuss what's going on in the Michigan area. MiFbody.com was created to allow for an easy one-stop place to find out what's going on in Michigan as far as FBody events, to find out what clubs are available in your immediate area, and for an easy place to post classifieds for items you want to sell! Our goal was to create a more close-knit community of FBody enthusiasts in the state of Michigan, and to bring Camaro and Firebird enthusiasts alike together for some amazing FBody events!
The most important thing to know about the Michigan FBody Association is that we are NOT a club! The Michigan FBody Association is open to everyone, and is a community. Thus, we will have get togethers, casual cruises, events, and such like that, but this is not an exclusive club and it's 100% free to join this site! So what are you waiting for? Register now!
If you have any problems with the registration process or your account login, please contact us!
I dont know if you've ever considered going to the 4.3 but - you can get an old ASA motor from before they had the LS1s. They have a 4.3 with bowtie heads and a special ASA intake on them. My dads buddy has one in his 36 (which was at autorama). Take a stab at how much that little guy puts out....
I dont know if you've ever considered going to the 4.3 but - you can get an old ASA motor from before they had the LS1s. They have a 4.3 with bowtie heads and a special ASA intake on them. My dads buddy has one in his 36 (which was at autorama). Take a stab at how much that little guy puts out....
Will adding a stroker kit change the type of supercharger my car uses? Will I still be able to use one made for a 3.8?
Will adding a stroker kit change the type of supercharger my car uses? Will I still be able to use one made for a 3.8?
Yeah. As long as you don't go to extreme. A 3.8 'charger will bolt right on your 4.2, even if you do get new heads. If you are making it pump to many ponies you might want to get it tightened up or replaced with something bigger/stronger.
1999 Pontiac Trans Am- LS1 - M6 - ITSSLOW - 12.998@109.59 - SOLD
1994 Chevrolet Camaro - 3.4L - M5 - ITSSLWR - 16.558@85.38 2003 Chevrolet Blazer
Yeah. As long as you don't go to extreme. A 3.8 'charger will bolt right on your 4.2, even if you do get new heads. If you are making it pump to many ponies you might want to get it tightened up or replaced with something bigger/stronger.
a 3.8l sc will not bolt right up to a 4.3l, but will bolt up to the 4.2l stroked engine as it uses the 3.8l block yet.
------------------------------------------
2004 GMC Envoy - Tuned, Airraid Intake, rest stock
2005 Malibu - Stock, anyone have a ecotec factory gm supercharger for me? lol
Tweet
Comment