Drive shaft Balancing around Battle Creek...

[LSxDreamer]

Does anyone know someone who can balance driveshafts in or around Battle Creek...

[hgffrank]

I work at Boshears Ford in Marshall, and I know we send ours out. I could find out where we send them if you would like. I'm sure that its somwhere fairly local since we do almost all our business locally. I know where we send them will do anything needed. Just let me know.

[LSxDreamer]

That would be awesome if you could!

[my95z28]

did you ever end up selling the E85 car?

[LSxDreamer]

No I still have it. I actually driving it right now. I only live a mile from work so it's not bad really to drive it in the weather we've been getting. It's still for sale but I'm not going to really push it until around spring time and see if I can get the money I'm looking for.

[LSxDreamer]

Did you find anything out...

[my95z28]

There is a place over in Marshall that might be able to do it I think. They are just west of Marshall on Michigan Ave. Its a big red barn with a house next to it with a U shaped driveway. He has a LS1 trans-am that is NBM I think, and a Red 1998-02 camaro with the RS body kit on it. Usually one of them is sitting in the driveway. If you would like I could stop by there tomorrow and see if he can do it. Never had anything done there so I don't know the quality of work.

[LSxDreamer]

Yeah that would be great if you could. I think I know the exact place that you are talking about since I take Michigan Ave to get to Marshall most of the time.

[my95z28]

Well I went there today, but they closed at 4pm and I got there at like 4:30 so nobody was around. That being said, there is no way in hell that I would take anything there. Looks like an absolute pit inside. Its a pole barn, and for the first what looks like 20ft there is just a path to walk on up to the counter. The rest of it has shit piled up. I know that has nothing to do with the persons work, but I wouldn't want to take the chance.


Do you go to KCC? I am almost positive that I saw your car this morning. Z28 badged, SS spoiler and unpainted SS hood. But the dead giveaway was the license plate, "CORNFED" Nice parking job btw, lol.

[LSxDreamer]

Well I went there today, but they closed at 4pm and I got there at like 4:30 so nobody was around. That being said, there is no way in hell that I would take anything there. Looks like an absolute pit inside. Its a pole barn, and for the first what looks like 20ft there is just a path to walk on up to the counter. The rest of it has shit piled up. I know that has nothing to do with the persons work, but I wouldn't want to take the chance.


Do you go to KCC? I am almost positive that I saw your car this morning. Z28 badged, SS spoiler and unpainted SS hood. But the dead giveaway was the license plate, "CORNFED" Nice parking job btw, lol.

Thanks for the heads up on the pole barn.

And yeah I go to KCC on M, W from 8:30 to 2:20 taking business, weight lifting, art appreciation, and early western civilizations. I also got there on T, TR for trigonometry.

And yes that was my car that you saw, lol! When I got there this morning around 8:20a it was snowing non stop and the parking lots had snow all over the place. So when I tried parking I wasn't going anywhere and if I was, I was going sideways, haha! Every time I tried to pull in the spot my front drifted towards the car to my right and if I tried backing up my ass would drift towards the truck to the left. So I when I almost hit the truck I said F IT, I'M DONE! And went inside to class, haha! I was so expecting at ticket for taking up to much space.

What classes are you taking...

[my95z28]

I'm there from 10:00-4:00 on Mondays and Wednesdays and 6-8PM on Tuesdays and Thursdays. I'm taking Intro to CAD, Photography 101, HIST 222 and Trig. I ALMOST took trig on T, TR nights, but a spot opened in the MW classes so I took that.

[LSxDreamer]

Yeah I wanted to take trig MW too but it was full and after I scheduled the rest of my classes it no longer fit. I almost took CAD too but I am trying to get all of my core classes finished up and transfer to either Western for engineering design in the fall and then onto SCAD for Industrial design OR transfer to College for Creative Studies in Detroit for Idustrial Design/Transportation Design.

[my95z28]

Thats what I'm doing, is going to KCC, and then transferring to Western for my engineering. Although, I think that I am going to get my Associates in CAD and SolidWorks before I transfer, that way if need be I have a skill that I can get a decent job with.

[LSxDreamer]

That sounds like a really good plan! I hope to you around school. What do you drive to school?

And also anybody know where to get a driveshaft balanced... haha!

[my95z28]

Right now I'm driving a red 2002 Chevy 1500. Thats just cause my car is in the shop though, usually I drive that, but with steelies and blizzaks on it. You are effin crazy to be driving that car thru the winter. Mines a little sketchy, and I have ~260hp and 300tq. No wonder why you couldn't move, lol. We definitly have to get together when the weather gets a little nicer. You ever cruise Battle Creek in the summers? That is usually where I am for 4hrs or so either friday or saturday of every weekend in the summer.