Painting..interior

[BP_Z28]

Ok I started last summer going with black/green/greyish interior..so now im finishing up this summer

Couple things I want to paint are the a pillars
and the hatch panels BUT


Whats the best way to take out off this arear right here..were are all the clips/screws at? If someone can show me please




And I cant unscrew this damn clip because its basically shredded (as you can see its stuck in there) so whats the best way to get this off/ out..I can barely fit my hand in there to try and turn it

[BP_Z28]

dunno why it says the 27th of apr lol

[BP_Z28]

Oh yea..can someone show me every clip where the a-pillars hold into because I dont want to break them when I take them off

[MCHP]

On that rear area there is a screw at the bottom and you have to pull out the center of the coat hook at the top and I think there might be a screw behind it. At least I think that is correct.

[93formulalt1]

On that rear area there is a screw at the bottom and you have to pull out the center of the coat hook at the top and I think there might be a screw behind it. At least I think that is correct.

There's no screw behind it, it's just a retaining clip. Once you pull out the center clip, the coat hook will pop right out. It's all velcro attachment points besides that, maybe a screw on the inside edge of the door sill, I didn't run into any problems pulling mine out when I welded in my patch panel. . .

[BP_Z28]

kk thanks..what about the pillars where exactly are the clips at also?

[BP_Z28]

on the rear back panels..whats the best approach for taking them off? like right to left etc...

[phoenix_rising]

Bump!

[BP_Z28]

anyone know?!?!?

[BP_Z28]

nvm I found the clips and know exaclty where their at now..ill show the pics where there at if any of you ever plan to paint them and what not

and nick you said you took out your rear area panels right?...I took off the hanger in the back (frustrated the hell out of me completely clueless how to take it off lol)...and wher the rear seats and lock in place...it looked like it needed a torx to take off right?

[BP_Z28]

I got these done...both pillars actually i put the driver side one on already

[BP_Z28]

nick did you have to use a torx to take off the hindge that locks the rear seats in place?

[TransAmRocker]

thats pretty bad dude, im 14 and i could figure out how to rip my interior out, paint it and put it back in single handed.....anywho....ill check out the pix when i get home...cant see em at school.

[BP_Z28]

thats pretty bad dude, im 14 and i could figure out how to rip my interior out, paint it and put it back in single handed.....anywho....ill check out the pix when i get home...cant see em at school.

I can figure it out also which I did on my own but was asking someone who did it before me so I dont break a clip or something like I did in my other camaro