Tweet
4th gen factory body kit
The factory body kit on a 4th gen camaro. It can't be that hard to take off but is there any perminate holes/marks? Atleast that you can see from the outside of have to be repaired. Also, is there any interest in anyone buying one?
-
2005 Yamaha R6
1999 Pontiac Trans Am - LS1 - M6 - ITSSLOW - 12.998@109.59 - SOLD
1994 Chevrolet Camaro - 3.4L - M5 - ITSSLWR - 16.558@85.38
2003 Chevrolet Blazer
2001 Yamaha YZ426F
-
Nick wants it -
I think Nick wants it. . . lol PM me a price, I'll even come out and take it off for you!Originally posted by pheonix_rising View PostNick H.
Current MIFC Vice President
sigpicComment
-
I think all you'll have are a couple holes in the inner fender down at the bottom in each wheel well as for the front and back i think all the wholes are unseen.sigpic
2002 Camaro v6: Cobalt metalic blue
"Blue Devil"
Alpine cda-9851, 2- RE 6.5" component sets, 1 RE sx15" subwoofer, 1 Alpine MRV 1005d amplifier, Knuconcpets rca's, Memphis audio wiring, and 100 sq ft of FAT MAT extreme... got for 147 db at the windshield before fat mat new numbers soon to come.Comment
-
i dunno if the 98+ are different than mine, but mines realllllly simple to take off but there are a lot of holes that the brackets are rivetted onto the body, if i took mine off i think you would see all of them, so i would never take mine off, but if you fill them or something.......
1997 Camaro RS- Y87
-Headers-Exhaust-CAI-Ground FX, Blah Blah Blah...Nitrous.....SOLD
Check it out:
http://www.fquick.com/silver6_maro
2003 CBR600RR, Modded, Black, and Fast!!! SOLD
NOW...2008 Yamaha R6!!
All I have left is a 1995 Kawi SXi Stand up modded JetSki
, and a 16 Foot Snipe Saliboat 
Comment
-
on my 02 i there are brackets all over the place riveted in such as the rear bumper cover. after take off the appearance package, then you would need to remove the brackets and I would assume you would see some holes along with normal wear around such spots from dirt and other buildups. i am a fan of the kit, so i would never take it offComment
-
I'm not a fan of the 4th gen kits. 93-97 or 98-02. Just my .02 though. Everyone has their own taste but I found a smoking deal on a 96 Camaro but it has the kit and the only place I'd be driving a Camaro with a body kit is home to tear it off. I'm mostly interested in if there are going to be perminate holes or really common spots where the body kit wears through the paint. Even if it is I don't see that being to big of a problem. The car was Resprayed winter of 2005 and only seen 1,800 miles last summer.2005 Yamaha R6
1999 Pontiac Trans Am - LS1 - M6 - ITSSLOW - 12.998@109.59 - SOLD
1994 Chevrolet Camaro - 3.4L - M5 - ITSSLWR - 16.558@85.38
2003 Chevrolet Blazer
2001 Yamaha YZ426F
Comment
-
Permanent holes until someone welds them in.- Brian Meissen
Owner, MiFBody.com
Administrator, LTxTech.com
1994 Camaro LT1 Transplant -
357ci LT1, cammed, stalled, and driven.
2022 Camaro LT1 - "Cherry Bomb 2"Michigan FBody Meet & Greet Car Show 2022
June 4th, 2022 - 9am to 3pm!!!
The HUB Stadium, Auburn Hills, MIComment
-
Well, everyone here knows I have a welder. . . lol I can weld up and grind the holes for you if you want to bring it out to me if and when you get it.Nick H.
Current MIFC Vice President
sigpicComment
-
1997 Camaro RS- Y87
-Headers-Exhaust-CAI-Ground FX, Blah Blah Blah...Nitrous.....SOLD
Check it out:
http://www.fquick.com/silver6_maro
2003 CBR600RR, Modded, Black, and Fast!!! SOLD NOW...2008 Yamaha R6!!
All I have left is a 1995 Kawi SXi Stand up modded JetSki, and a 16 Foot Snipe Saliboat
Comment
-
yeah no welding on the bumper
Comment
-
The front and rear bumper covers are the easier parts to fill. No welding is required, just some bumper repair and a little time.Nick H.
Current MIFC Vice President
sigpicComment
-
Yeh, didn't even mention the bumpers cause they're so easy. It's the holes on the side rocker panels that suck. Personally, for the trouble to remove them I would just keep them... especially because the RS kit kicks ass.- Brian Meissen
Owner, MiFBody.com
Administrator, LTxTech.com
1994 Camaro LT1 Transplant - 357ci LT1, cammed, stalled, and driven.
2022 Camaro LT1 - "Cherry Bomb 2"Michigan FBody Meet & Greet Car Show 2022
June 4th, 2022 - 9am to 3pm!!!
The HUB Stadium, Auburn Hills, MIComment
-
2005 Yamaha R6
1999 Pontiac Trans Am - LS1 - M6 - ITSSLOW - 12.998@109.59 - SOLD
1994 Chevrolet Camaro - 3.4L - M5 - ITSSLWR - 16.558@85.38
2003 Chevrolet Blazer
2001 Yamaha YZ426F
Comment
-
We can have a fbody body work party. Bring that maro down and I'll order some pizzas. It'll be fun. plus its a nice country drive.Originally posted by KuruptWS6spd View Post
Comment
Comment