Anyone have a link to a write up for 2 1/16th" gauges in the center AC vents? I know 2 5/8th fits fine, but mine are 2 1/16th.. Heard you can use fernco couplers from Home depot to fill the gap.. Want to get away from the triple gauge pod.. Thanks!
Announcement
Collapse
No announcement yet.
Gauges in AC Vents
Collapse
X
-
There has to be a way to make it look nice???Originally posted by Boost Addict View PostI think it looks redic with smaller gauges. But since you already have them I see why you would maybe want tosigpic
U.S. Army 1983-2005
11.20@122.37 1.51 60'
Originally posted by WMCCjames
"Plans Subject to change upon Sobering up"
Comment
-
if you remember when i parked next to you 2 yrs ago at meet n great i had them in the vent... since then i removed them and wold lean to piller, but i dont see a big reason for that since all my dash gauges work, decided mine were over killsigpic
Comment
-
Just bored and thinking... lol I thought your setup looked pretty good..Originally posted by ICEPICK View Postif you remember when i parked next to you 2 yrs ago at meet n great i had them in the vent... since then i removed them and wold lean to piller, but i dont see a big reason for that since all my dash gauges work, decided mine were over killsigpic
U.S. Army 1983-2005
11.20@122.37 1.51 60'
Originally posted by WMCCjames
"Plans Subject to change upon Sobering up"
Comment
-
I would relocated my hvac controls to the glovebox in put the gauges in their place or something before I put the smaller gauges in the ventsOriginally posted by OIF1VET View PostThere has to be a way to make it look nice???2015 Silverado
Originally posted by JoeliusZ28If you need 6 and half grand to break your tires loose you shouldnt be attempting a holeshot.
Comment
-
There's a thinking man... I rarely use my HVAC controls anyway...Originally posted by Boost Addict View PostI would relocated my hvac controls to the glovebox in put the gauges in their place or something before I put the smaller gauges in the ventssigpic
U.S. Army 1983-2005
11.20@122.37 1.51 60'
Originally posted by WMCCjames
"Plans Subject to change upon Sobering up"
Comment
-
Obsessed

- December 28th, 2005
- 931
- Friends call me Cat.
- '87 305 IROC Z Bride nick named my ride as "The Ole Whore". IDK, jealous maybe?
- Jackson
- Civil Servant
- Send PM
Look at this site -> http://www.glowshiftdirect.com/Originally posted by OIF1VET View PostAnyone have a link to a write up for 2 1/16th" gauges in the center AC vents? I know 2 5/8th fits fine, but mine are 2 1/16th.. Heard you can use fernco couplers from Home depot to fill the gap.. Want to get away from the triple gauge pod.. Thanks!
I put a couple in Ms. Percy. I hid them right out in plain sight. Camouflage - works wonders. Good quality. The transducer for reading NO2 pressure wasn't the correct transducer. One phone call, no problem, another one was on the way. The allowed me to cross ship the old transducer while they shipped the new and improved transducer. Can't ask for better service then that. Not a question was asked. The feller on the other end of the line really sounded a bit embarrassed.
Comment
-
What am I looking for at this site? All I see are triple gauge pods...Originally posted by squareandcompass View PostLook at this site -> http://www.glowshiftdirect.com/
I put a couple in Ms. Percy. I hid them right out in plain sight. Camouflage - works wonders. Good quality. The transducer for reading NO2 pressure wasn't the correct transducer. One phone call, no problem, another one was on the way. The allowed me to cross ship the old transducer while they shipped the new and improved transducer. Can't ask for better service then that. Not a question was asked. The feller on the other end of the line really sounded a bit embarrassed.sigpic
U.S. Army 1983-2005
11.20@122.37 1.51 60'
Originally posted by WMCCjames
"Plans Subject to change upon Sobering up"
Comment
-
Obsessed

- December 28th, 2005
- 931
- Friends call me Cat.
- '87 305 IROC Z Bride nick named my ride as "The Ole Whore". IDK, jealous maybe?
- Jackson
- Civil Servant
- Send PM
http://www.glowshiftdirect.com/elite...or-gauges.aspx
http://www.glowshiftdirect.com/Unive...wivel-Pod.aspx
http://www.glowshiftdirect.com/60mm-...wivel-Pod.aspx
Edit: Gauges are supplied with their own pod. I used those that came with the gauges. The links for the pod above are the step up series. On a black dash, mounting then to the right side of drivers view, tilted to drivers sight line, they're tits! Recessed in just a bit. Camouflaged to the serious degree.Last edited by squareandcompass; October 23rd, 2010, 08:10 PM.
Comment
-
Obsessed

- December 28th, 2005
- 931
- Friends call me Cat.
- '87 305 IROC Z Bride nick named my ride as "The Ole Whore". IDK, jealous maybe?
- Jackson
- Civil Servant
- Send PM
Originally posted by OIF1VET View PostI see said the blind man... I already have all my gauges... I have an idea to work on this winter...
Cool. I wasn't sure of what you were wanting to look at. So I threw this out there to possibly give you additional ideas. Hope I helped.
Comment
-
Thanks man, first link didn't show those little pods.. Wasn't sure what U wanted me to see.Originally posted by squareandcompass View PostCool. I wasn't sure of what you were wanting to look at. So I threw this out there to possibly give you additional ideas. Hope I helped.
Not that I can see very well right now anyways...
sigpic
U.S. Army 1983-2005
11.20@122.37 1.51 60'
Originally posted by WMCCjames
"Plans Subject to change upon Sobering up"
Comment
-
Obsessed

- December 28th, 2005
- 931
- Friends call me Cat.
- '87 305 IROC Z Bride nick named my ride as "The Ole Whore". IDK, jealous maybe?
- Jackson
- Civil Servant
- Send PM
Dang. Wished I had some of that "can't see very well right now"...
Comment
-
LOL, I think you're too far away for me to share..Originally posted by squareandcompass View PostDang. Wished I had some of that "can't see very well right now"...
sigpic
U.S. Army 1983-2005
11.20@122.37 1.51 60'
Originally posted by WMCCjames
"Plans Subject to change upon Sobering up"
Comment


Comment