Want my taillights blacked out and rather have someone do it who's successfully done it before.
Announcement
Collapse
No announcement yet.
Any one good at tinting taillights around Lapeer???
Collapse
X
-
-
I've done it well before, you've seen my tails before. I'm not around Lapeer, but next time I'm out that way, I can do them for you if you'd like. It's easy enough to do it yourself, just do the prep work. I used scotch brite pads to scuff the surface of the light, then hit it with a shop towel that had wax & grease remover on it, then hit it with a tack cloth. After that, spray a light coat of the tint, let it dry, then spray another light coat. Usually 2 coats is dark enough, I did 3 on mine, and it's too dark. After the 2nd coat dries, spray a coat or two of clear, let dry, wetsand with 1500 grit or higher wetsand paper to get rid of any orange peel, then wheel with a medium compound.
At least that's how I did it, and mine look great. People constantly ask me where I got my taillight covers, and don't believe that it's actually tinted.Nick H.
Current MIFC Vice President
sigpic
-
the trick to successfully doing it is just three things:
1) properly prep the surface by wetsanding with 2000 grit and then cleaning it with alchohol
2) paint in a clean area and you MUST wait at least a half hour between coats to avoid cracking, not just dry to the touch.
3) after the final coat wait 24 hours before wetsanding them smooth and then buffing.
I'd be willing to do them for ya rolo for a few bucks but im not exactly close either.-Joel
1995 Z28 M6 - AI226/234 - autocross ricer
1984 Scottsdale K10 - 305/4bbl/4spd

WTB List:Midwest Chasis DS Loop
Comment
-
I've done several now. Only 15 minutes form Lapeer. Well....M24 and I-69 (giggity!) but not sure where you are from there.2005 Yamaha R6
1999 Pontiac Trans Am - LS1 - M6 - ITSSLOW - 12.998@109.59 - SOLD
1994 Chevrolet Camaro - 3.4L - M5 - ITSSLWR - 16.558@85.38


2003 Chevrolet Blazer
2001 Yamaha YZ426F
Comment
-
i dont think clear is necessary, isnt the stuff a mixture of glossblack and clear coat to begin with?-Joel
1995 Z28 M6 - AI226/234 - autocross ricer
1984 Scottsdale K10 - 305/4bbl/4spd

WTB List:Midwest Chasis DS Loop
Comment
-
-
aka Purple94Z28
- May 1st, 2009
- 1858
- Nick Kerns
- 1999 BBM z28 Camaro
- Saginaw Michigan
- New Car Sales Consultant
- Send PM
I wanna do mine but i am really scared there gonna turn out bad and my tail lights are in great condidtion1999 z28 Bright Blue Metallic 1 of 10
1999 z28 Hugger Orange RS 1 of >309 (Sold)
1997 z28 White 6 speed Heads and Cam. (Sold)
1994 z28 PPM auto Cam only (Sold)
1984 sport coupe red 4 cyl (Sold)
Comment
-
ill pay to have mine done. there aftermarket chrome ones that came with car. and they look way to ricer. im in redford but im willing to drive.HISTORY OF CARS PAST AND PRESANT (none of them were wrecked)
1989 S10 standard with 350 carb'd, th350, shift kit, shorties, 600cfm, hooker TD's, 3.23 non posi, B&M shifter(sold)
1991 firebird with t-tops and 3.1L, 700r4, 3.23 non posi, flowmaster cat back, 15ibs injectors, (sold)
1991 formula with t-tops, WS6, 5.0TPI, WC T5. 3.42 posi. magnaflow cat back, 52mm TB, and hurst billet (sold)
1994 camaro z28 with t-tops, 5.7LT1, T56, 3.42 posi. CAI, elbow, Airfoil, SFC, STB, pro 5.0, flowmaster cat back. (sold)
2000 Trans am with t-tops, 5.7LS1, T56, 3.42posi, LT'S, ORY, magnaflow, lid, lingenfelter intake, 3pt SFC, STB, LCA, (current)
Comment




Comment