Paint update pics

[01badbird]

Don't know if it helps but you(disconnect battery) take fuse boxes out of plastic cradle and have to disconnect the big red power source wires,will have to bend a little different and takes some convincing but you can stuff into hole.you'll also have bracket to remove on fender (drilled the spot welds for mine but covered with nitrous bracket)then you can work from access hole from underneath and I zip tied the blocks (not wires)with big ties and reconnect power wire.only thing you have to go thru access to change fuses(how many times have you had to) and with T/A bumpers lower hole in bumper will let water in if driven in rain.will try to get pics from access later.then take some cardboard and make templates (have mine can make copy and mail ya just pm me) I also covered opening on side.Also never mind the wires they are being rerouted doing a couple of things and just wired in last year to see if I liked nitrous and now I'm hooked.their is a fastener that I put a threaded rod in and use acorn nut to hold cover in place

100_0710.JPG
JAZZ 031.jpg
enginebaynos.JPG
JAZZ 029.jpg
Picture 103.jpg
100_0707.JPG

[01badbird]

wow didn't know pics would go up like that, sorry.but heres a couple from underneath also I used some foam around edges where wires could contact the edge of hole on bottom.and no zip tie isn't in way to access fuses was also able to put the square lil module (abs?) in there to let me know how it goes.also removed air pump but figured you probably did too.
JAZZ 033.jpgJAZZ 037.jpg

[meissen]

Fixed the pics for ya.

[OIF1VET]

Yeah, air pump is long gone.. Hopefully Saturday I can make it to the paint shop and work on it.. Thanks!

[01badbird]

Don't know if interested but I cut up bumper support and lost 10lbs. just an idea since apart.frt.bumper frt. view.jpg

[Formula Z]

i think your engine bay is the cleanest, most organized of any 4th gen ive ever seen. id love to clean mine up like that.

[OIF1VET]

i think your engine bay is the cleanest, most organized of any 4th gen ive ever seen. id love to clean mine up like that.

I wouldn't go that far..lol 01BadBird has an awesome bay!!! I Still have a ways to go.. But I'll help with the mods on yours to clean her up.. Went to the paint shop today, should be painted my the first week of March. Then lots of wetsanding..

[Formula Z]

dont wanna burst your bubble, but thats whos i was talking about, lol. yours is very nice too although. its very difficult to make these motors and engine compartments look good

[OIF1VET]

dont wanna burst your bubble, but thats whos i was talking about, lol. yours is very nice too although. its very difficult to make these motors and engine compartments look good

No bubble to burst..

[1qwikSS]

car looks good larry!!

[OIF1VET]

car looks good larry!!

Hopefully soon it will look good.. Quite honestly it looks like a $300 car right now..

[ITSSLOW]

No pictures in like a week. This thread is full of fail!!!!!!!

[OIF1VET]

No pictures in like a week. This thread is full of fail!!!!!!!

Nothing to update..

[SoulTerror]

Hopefully soon it will look good.. Quite honestly it looks like a $300 car right now..

I'll give you $400 for it.

[OIF1VET]

I'll give you $400 for it.

You and probably a 100 other people..