Announcement

Collapse
No announcement yet.

Happy and un Happy...

Collapse
X
Collapse
Who has read this thread:
 
  • Page of 3
  • Filter
  • Time
  • Show
Clear All
new posts
Previous 1 2 3 template Next
  • #1

    Happy and un Happy...

    Well... I ripped the rear interior completely out of my car today thanks to some brand new... Pretty much god like... torx bits... Ah master craft... They make some damn fine torx bits. But anywho I'm pretty happy/ slightly depressed. I was expecting a massive amount of rust... Which in the whole well area there is absolutely none. I mean it looks awsome the black paint is amazing looking...How ever on the passenger side wheel well its a little worse then expected and ill need to replace a good amount of the wheel well and the all of the quarter... But. All i need is a good quarter panel and then the rest i will hand build. So... Pretty good but kinda sucks.

    Pic one: Rear quarter.. Sorry for weird angle but theres an engine sitting there that i cant get around so its upside down.
    Pic Two: Passenger side rot right at the bottom of the quarter
    Pic Three: Bottom of well.
    Pic four: Whole on drivers side
    Pic Five: Nice black paint.
    Pic Six: Top of passenger wheel well.
    Pic Seven: passenger rot again.
    Attached Files
    Last edited by Naterman35; January 9th, 2008, 09:42 PM.
    1989 Chevrolet Camaro- Currently in pieces...
    Tags: None
  • #2
    Pics, Dammit, Pics!
    Originally posted by Redd8407
    I WANT NOISE! SPEED! AN ENGINE THAT SHAKES MY INTERNAL ORGANS LIKE THEY GOT PARKINSON'S! I DONT WANT AN ENGINE THAT IS PARTIALLY POWERED BY MY LAPTOP BATTERY!
    Originally posted by Z28ISGR8
    WHY THE F*CK IS THERE A GOAT ON A FERRARI?
    Originally posted by Darren
    I think it is because I take it in and out all the time, the rubber has just stretched out, especially at the bottom where it is really thin. It annoys me more then anything.

    Comment

    • #3
      yeah damn it you know better..... pics or GTFO




      Comment

      • #4
        PICTURES!

        Rust sucks.

        I got rust poking through on the lower front of both of my rear wheel wells, and I can see some holes in the engine compartment... I've painted over (using Krylon Rust-Eliminator paint that, crazyily enough, matches my paint near exactly) the rust after grinding/sanding it down.
        Gone but not forgotten: 1986 Chevrolet Camaro IROC-Z

        "You shall ride eternal. Shiny and chrome."

        Comment

        • #5
          Oh i will be getting picks... It just makes me giggle when everyone freaks with out them... Maybe ill post a TON of threads and not a single pic.. Ha what now. Any who ill go get some guys and gals.


          Well Actually i just went out and took pictures. How ever dads on the computer with fire wire (video camera not digital) So looks like you'll have to squirm and melt with out pictures for a little while. Woot 400 posts.
          Last edited by Naterman35; January 9th, 2008, 07:44 PM.
          1989 Chevrolet Camaro- Currently in pieces...

          Comment

          • #6
            Originally posted by Naterman35 View Post
            Maybe ill post a TON of threads and not a single pic.. Ha what now.
            I think you'd get banned...
            Gone but not forgotten: 1986 Chevrolet Camaro IROC-Z

            "You shall ride eternal. Shiny and chrome."

            Comment

            • #7
              By the way anyone know were to get a cheaper Die grinder thats electric? If they make one that is... I know they make air powered ones but no idea about electric and i no way can afford a good compressor.
              1989 Chevrolet Camaro- Currently in pieces...

              Comment

              • #8
                Ya rust sux, my back fenders starting to rust.

                Comment

                • #9
                  Originally posted by MP81 View Post
                  I think you'd get banned...
                  I can almost guarantee it...
                  Originally posted by Redd8407
                  I WANT NOISE! SPEED! AN ENGINE THAT SHAKES MY INTERNAL ORGANS LIKE THEY GOT PARKINSON'S! I DONT WANT AN ENGINE THAT IS PARTIALLY POWERED BY MY LAPTOP BATTERY!
                  Originally posted by Z28ISGR8
                  WHY THE F*CK IS THERE A GOAT ON A FERRARI?
                  Originally posted by Darren
                  I think it is because I take it in and out all the time, the rubber has just stretched out, especially at the bottom where it is really thin. It annoys me more then anything.

                  Comment

                  • #10
                    Originally posted by MP81 View Post
                    I think you'd get banned...
                    =[ Its unfair.... Its cool for us to rape people and get pictures.. but when we don't bam were banned. Unfair i tell ya. We need to start a "Help Nate get a new camera because both of his are broke and cost $200 to fix and he doesn't want to pay that crap" fund.. Whadda you all say? wanna pitch in???... J/k
                    1989 Chevrolet Camaro- Currently in pieces...

                    Comment

                    • #11
                      Originally posted by Naterman35 View Post
                      By the way anyone know were to get a cheaper Die grinder thats electric? If they make one that is... I know they make air powered ones but no idea about electric and i no way can afford a good compressor.
                      Harbor Freight...maybe $30...
                      Originally posted by Redd8407
                      I WANT NOISE! SPEED! AN ENGINE THAT SHAKES MY INTERNAL ORGANS LIKE THEY GOT PARKINSON'S! I DONT WANT AN ENGINE THAT IS PARTIALLY POWERED BY MY LAPTOP BATTERY!
                      Originally posted by Z28ISGR8
                      WHY THE F*CK IS THERE A GOAT ON A FERRARI?
                      Originally posted by Darren
                      I think it is because I take it in and out all the time, the rubber has just stretched out, especially at the bottom where it is really thin. It annoys me more then anything.

                      Comment

                      • #12
                        Or a Dremel Rotary...

                        I LOVE my Dremel... *hugs*
                        Gone but not forgotten: 1986 Chevrolet Camaro IROC-Z

                        "You shall ride eternal. Shiny and chrome."

                        Comment

                        • #13
                          Originally posted by MP81 View Post
                          Or a Dremel Rotary...

                          I LOVE my Dremel... *hugs*
                          My lithium cordless Dremel is THE BEST...highly recommended...
                          Originally posted by Redd8407
                          I WANT NOISE! SPEED! AN ENGINE THAT SHAKES MY INTERNAL ORGANS LIKE THEY GOT PARKINSON'S! I DONT WANT AN ENGINE THAT IS PARTIALLY POWERED BY MY LAPTOP BATTERY!
                          Originally posted by Z28ISGR8
                          WHY THE F*CK IS THERE A GOAT ON A FERRARI?
                          Originally posted by Darren
                          I think it is because I take it in and out all the time, the rubber has just stretched out, especially at the bottom where it is really thin. It annoys me more then anything.

                          Comment

                          • #14
                            Is there a harbor freight around? I might have to order one... I don't want to use a dremel for it because i afraid it wouldn't be able to hold up to it. I would have to use a way smaller wire wheel but then that would take ages.


                            How well would those work for doing the majority of under body?... You say there highly recommended... Would they be recommended for rust removal on the underside if you have a decent amount down there.
                            1989 Chevrolet Camaro- Currently in pieces...

                            Comment

                            • #15
                              Originally posted by Naterman35 View Post
                              Is there a harbor freight around? I might have to order one... I don't want to use a dremel for it because i afraid it wouldn't be able to hold up to it. I would have to use a way smaller wire wheel but then that would take ages.


                              How well would those work for doing the majority of under body?... You say there highly recommended... Would they be recommended for rust removal on the underside if you have a decent amount down there.
                              Yeah, I don't know if you'd want to use a Dremel for heavy action like that...for small hard to get at areas, it's good.

                              harborfreight.com is a good site...they also have a store over on Telegraph and 59...lethal, lethal store...be careful...
                              Originally posted by Redd8407
                              I WANT NOISE! SPEED! AN ENGINE THAT SHAKES MY INTERNAL ORGANS LIKE THEY GOT PARKINSON'S! I DONT WANT AN ENGINE THAT IS PARTIALLY POWERED BY MY LAPTOP BATTERY!
                              Originally posted by Z28ISGR8
                              WHY THE F*CK IS THERE A GOAT ON A FERRARI?
                              Originally posted by Darren
                              I think it is because I take it in and out all the time, the rubber has just stretched out, especially at the bottom where it is really thin. It annoys me more then anything.

                              Comment

                              Previous 1 2 3 template Next
                              Working...
                              X